[Wed Mar 14 12:49:32 2012] Detection parameters:
  Position = (323.9, 286.8) = 22 29 9.39 58 24 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.8 +/- 16.5
  Background counts = 51.5
  Rate = 0.003 +/- 0.0003

[Wed Mar 14 12:49:32 2012] Off-axis axis estimate = 2.03'
[Wed Mar 14 14:22:38 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 14:22:38 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Mar 14 14:22:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.716
[Wed Mar 14 14:22:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Wed Mar 14 15:03:10 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 14 15:03:10 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 14 15:03:10 2012] Fit fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Mar 14 15:03:10 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 14 15:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 14 15:03:10 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 14 15:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 14 15:03:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 15:03:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.038381 pixels away
[Wed Mar 14 15:03:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:03:29 2012] Assessing source extent using major
[Wed Mar 14 15:03:29 2012] Source does appear to be extended
[Wed Mar 14 15:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 16:14:36 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 16:14:36 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Mar 14 16:14:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.716
[Wed Mar 14 16:14:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.44"
[Wed Mar 14 16:55:59 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_src3.ximg exists
[Wed Mar 14 16:55:59 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Mar 14 16:55:59 2012] Fit fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Mar 14 16:56:00 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Mar 14 16:56:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Mar 14 16:56:00 2012] fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Mar 14 16:56:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Mar 14 16:56:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 16:56:16 2012] Spatial fit model total counts = 459.916000, observed total counts = 419.000000
[Wed Mar 14 16:56:16 2012] Offset between fit and detection position for source 10 = 0.145537 pixels
[Wed Mar 14 16:56:16 2012] 460.535100 total counts/ 386.477000 bgd. counts: snr = 3.767131
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.145537 pixels
  Position = (323.8, 286.7) = 22 29 9.44 58 24 8.9
  Extent = 4.4" x 4.4", rotation angle = 0
  Source counts = 74.1 +/- 21.5
  Background counts = 386.5
  Rate = 0.001 +/- 0.0003
[Wed Mar 14 16:56:16 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 16:56:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 16:56:16 2012] Assessing source extent using major
[Wed Mar 14 16:56:16 2012] Source does appear to be extended
[Wed Mar 14 16:56:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 18:14:16 2012] XMMSAS src. selection expression = ellipse(28121.313200, 24894.498000, 262.006808, 262.006808, 0.000000, X, Y)
[Wed Mar 14 18:14:16 2012] Writing source region out to fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 14 18:14:16 2012] Extracting stamp from image fullrun_mos2_xmm0603740901_pi300-10000_cl_sm2.00.img.gz, (309, 272) - (339, 302)
[Wed Mar 14 18:14:16 2012] XMMSAS bgd. selection expression = annulus(28121.313200, 24894.498000, 436.678013, 873.356025, X, Y) && !ellipse(28014.160800, 25794.629600, 683.508820, 355.699210, 341.823000, X, Y)
[Wed Mar 14 18:14:16 2012] Writing fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10.gif
[Wed Mar 14 18:17:07 2012] Mean detx,y = (-806.96, -255.97) 
[Wed Mar 14 18:17:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 18:17:17 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 18:17:17 2012] Setting source spectrum file to fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 18:17:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Mar 14 18:28:56 2012] Not generating rmf since there are only 74 counts
[Wed Mar 14 18:28:56 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:32:54 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:32:54 2012] Error reading totcts from fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 18:32:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:32:55 2012] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0603740901_pi300-10000_pass1_cl_src10.arf
[Wed Mar 14 18:32:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:32:55 2012] Updating source flux to 1.7e-14
[Wed Mar 14 18:34:14 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting