[Wed Mar 14 12:49:06 2012] Detection parameters:
  Position = (165.2, 308.8) = 22 30 37.25 58 25 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 14.7
  Background counts = 44.3
  Rate = 0.001 +/- 0.0002

[Wed Mar 14 12:49:06 2012] Off-axis axis estimate = 9.69'
[Wed Mar 14 13:52:12 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 13:52:12 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed Mar 14 13:52:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Wed Mar 14 13:52:12 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.27"
[Wed Mar 14 14:22:38 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9.ximg exists
[Wed Mar 14 14:22:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9.csv
[Wed Mar 14 14:22:38 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Mar 14 14:22:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9.csv
[Wed Mar 14 14:22:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 14:22:38 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Mar 14 14:22:38 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Mar 14 14:22:38 2012] Fit fullrun_mos1_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Mar 14 15:03:23 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.392998 pixels away
[Wed Mar 14 15:03:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:03:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:03:23 2012] Assessing source extent using major
[Wed Mar 14 15:03:23 2012] Source does appear to be extended
[Wed Mar 14 15:03:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 15:48:14 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 15:48:14 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Wed Mar 14 15:48:14 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Wed Mar 14 15:48:14 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.27"
[Wed Mar 14 16:14:36 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8.ximg exists
[Wed Mar 14 16:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8.csv
[Wed Mar 14 16:14:36 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Mar 14 16:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8.csv
[Wed Mar 14 16:14:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 16:14:36 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Mar 14 16:14:36 2012] fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Mar 14 16:14:36 2012] Fit fullrun_mos1_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Mar 14 16:56:10 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 66.054450 pixels away
[Wed Mar 14 16:56:10 2012] Spatial fit model total counts = 341.871000, observed total counts = 342.000000
[Wed Mar 14 16:56:10 2012] Offset between fit and detection position for source 6 = 0.101844 pixels
[Wed Mar 14 16:56:10 2012] 340.712900 total counts/ 289.521000 bgd. counts: snr = 3.008578
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.101844 pixels
  Position = (165.2, 308.9) = 22 30 37.28 58 25 44.1
  Extent = 5.4 (3.8-7.5)", rotation angle = 0
  Source counts = 51.2 +/- 18.5
  Background counts = 289.5
  Rate = 0.0008 +/- 0.0003
[Wed Mar 14 16:56:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 16:56:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 16:56:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 16:56:10 2012] Source does appear to be extended
[Wed Mar 14 16:56:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 17:54:33 2012] XMMSAS src. selection expression = ellipse(14322.206660, 26823.568600, 323.459409, 323.459409, 0.000000, X, Y)
[Wed Mar 14 17:54:33 2012] Writing source region out to fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6_src.reg
[Wed Mar 14 17:54:33 2012] Extracting stamp from image fullrun_mos1_xmm0603740901_pi300-10000_cl_sm2.00.img.gz, (147, 290) - (184, 327)
[Wed Mar 14 17:54:33 2012] XMMSAS bgd. selection expression = annulus(14322.206660, 26823.568600, 539.099016, 1078.198031, X, Y)
[Wed Mar 14 17:54:33 2012] Writing fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6.gif
[Wed Mar 14 17:58:33 2012] Mean detx,y = (-10770.41, -8263.81) 
[Wed Mar 14 17:58:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 17:58:49 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 17:58:50 2012] Setting source spectrum file to fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 14 17:58:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar 14 18:14:06 2012] Not generating rmf since there are only 51 counts
[Wed Mar 14 18:14:06 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:32:53 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:32:53 2012] Error reading totcts from fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 14 18:32:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:32:54 2012] Using photon index=1.80, rate=0.000818, arf fullrun_mos1_xmm0603740901_pi300-10000_pass1_cl_src6.arf
[Wed Mar 14 18:32:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:32:54 2012] Updating source flux to 3e-14
[Wed Mar 14 18:32:57 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting