[Wed Dec 21 11:23:47 2011] Detection parameters:
  Position = (229.3, 384.8) = 5 34 34.82 -62 23 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.7 +/- 16.4
  Background counts = 25.4
  Rate = 0.003 +/- 0.0003

[Wed Dec 21 11:23:49 2011] Off-axis axis estimate = 8.02'
[Wed Dec 21 13:46:42 2011] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 13:46:42 2011] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Dec 21 13:46:42 2011] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.832
[Wed Dec 21 13:46:42 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.44"
[Wed Dec 21 15:55:02 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9.ximg exists
[Wed Dec 21 15:55:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9.csv
[Wed Dec 21 15:55:02 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Dec 21 15:55:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9.csv
[Wed Dec 21 15:55:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 15:55:02 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Dec 21 15:55:02 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Dec 21 15:55:02 2011] Fit fullrun_mos1_xmm0603740801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Dec 21 15:57:12 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.554502 pixels away
[Wed Dec 21 15:57:12 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 15:57:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 15:57:12 2011] Assessing source extent using major
[Wed Dec 21 15:57:12 2011] Source does appear to be extended
[Wed Dec 21 15:57:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 18:35:37 2011] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 18:35:37 2011] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Dec 21 18:35:37 2011] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.832
[Wed Dec 21 18:35:37 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 10.44"
[Wed Dec 21 20:22:49 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9.ximg exists
[Wed Dec 21 20:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9.csv
[Wed Dec 21 20:22:49 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Dec 21 20:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9.csv
[Wed Dec 21 20:22:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 20:22:49 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Dec 21 20:22:49 2011] fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Dec 21 20:22:49 2011] Fit fullrun_mos1_xmm0603740801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Dec 21 20:25:02 2011] Spatial fit model total counts = 360.935000, observed total counts = 361.000000
[Wed Dec 21 20:25:02 2011] Offset between fit and detection position for source 1 = 0.125581 pixels
[Wed Dec 21 20:25:02 2011] 364.099000 total counts/ 259.481000 bgd. counts: snr = 6.494618
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.125581 pixels
  Position = (229.4, 384.8) = 5 34 34.76 -62 23 34.1
  Extent = 4.7 (3.9-5.7)", rotation angle = 0
  Source counts = 104.6 +/- 19.1
  Background counts = 259.5
  Rate = 0.002 +/- 0.0004
[Wed Dec 21 20:25:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 20:25:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 20:25:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 20:25:02 2011] Source does appear to be extended
[Wed Dec 21 20:25:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 23:40:09 2011] XMMSAS src. selection expression = ellipse(19909.824200, 33425.998400, 281.448608, 281.448608, 0.000000, X, Y)
[Wed Dec 21 23:40:09 2011] Writing source region out to fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 21 23:40:09 2011] Extracting stamp from image fullrun_mos1_xmm0603740801_pi300-10000_cl_sm2.00.img.gz, (213, 369) - (246, 401)
[Wed Dec 21 23:40:09 2011] XMMSAS bgd. selection expression = annulus(19909.824200, 33425.998400, 469.081013, 938.162027, X, Y)
[Wed Dec 21 23:40:09 2011] Writing fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1.gif
[Wed Dec 21 23:51:07 2011] Mean detx,y = (374.20, -10820.12) 
[Wed Dec 21 23:51:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 23:51:36 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 23:51:36 2011] Setting source spectrum file to fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 23:51:36 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 22 00:54:50 2011] Updating aperture counts using extracted products
[Thu Dec 22 00:54:50 2011] Error reading totcts from fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 22 00:54:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 00:54:52 2011] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0603740801_pi300-10000_pass1_cl_src1.arf
[Thu Dec 22 00:54:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 00:54:52 2011] Updating source flux to 6.5e-14