[Mon Jun 25 00:03:11 2012] Detection parameters:
  Position = (412.6, 371.6) = 9 44 14.87 -62 24 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2452.6 +/- 59.5
  Background counts = 86.2
  Rate = 0.04 +/- 0.001

[Mon Jun 25 00:03:12 2012] Off-axis axis estimate = 9.83'
[Mon Jun 25 00:06:43 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 00:06:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 25 00:06:43 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Mon Jun 25 00:06:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.906
[Mon Jun 25 00:06:43 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.34"
[Mon Jun 25 01:03:07 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 25 01:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2.csv
[Mon Jun 25 01:03:07 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 25 01:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2.csv
[Mon Jun 25 01:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 01:03:09 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 25 01:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 25 01:03:09 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 25 01:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 25 01:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 02:03:08 2012] Spatial fit model total counts = 3572.150000, observed total counts = 2394.000000
[Mon Jun 25 02:03:08 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 25 02:03:08 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 02:03:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 02:03:08 2012] Assessing source extent using major
[Mon Jun 25 02:03:08 2012] Source does appear to be extended
[Mon Jun 25 02:03:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 02:03:26 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 02:03:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 25 02:03:26 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Mon Jun 25 02:03:26 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.906
[Mon Jun 25 02:03:26 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.34"
[Mon Jun 25 03:03:14 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 25 03:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2.csv
[Mon Jun 25 03:03:14 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 25 03:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2.csv
[Mon Jun 25 03:03:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 03:03:14 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 25 03:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 25 03:03:14 2012] fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 25 03:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 25 03:03:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 03:58:20 2012] Spatial fit model total counts = 3568.030000, observed total counts = 2394.000000
[Mon Jun 25 03:58:20 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 25 03:58:20 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 51.562980 pixels away
[Mon Jun 25 03:58:20 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 03:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 03:58:20 2012] Assessing source extent using major
[Mon Jun 25 03:58:20 2012] Source does appear to be extended
[Mon Jun 25 03:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 03:58:36 2012] Counts = 2452.555664, rescaling region sizes by 2.000000
[Mon Jun 25 03:58:36 2012] XMMSAS src. selection expression = ellipse(35845.772980, 32283.820190, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 25 03:58:36 2012] Writing source region out to fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 25 03:58:36 2012] Extracting stamp from image fullrun_pn_xmm0603740301_pi300-10000_cl_sm2.00.img.gz, (338, 297) - (488, 447)
[Mon Jun 25 03:58:36 2012] XMMSAS bgd. selection expression = annulus(35845.772980, 32283.820190, 4350.000000, 8700.000000, X, Y) && !ellipse(38366.476379, 37280.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38284.560200, 36178.819000, 553.440816, 553.440816, 0.000000, X, Y) && !ellipse(39320.866000, 35005.574000, 2105.280061, 2105.280061, 0.000000, X, Y) && !ellipse(29445.139862, 34909.091919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39222.553406, 32039.621216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.824066, 31982.001770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31802.102295, 30182.587524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43723.491821, 27704.638062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26319.195984, 26151.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28625.418152, 25476.333038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33002.340149, 40305.720398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.698000, 28882.758000, 1274.368037, 1274.368037, 0.000000, X, Y) && !ellipse(36984.746400, 28920.910200, 390.186411, 390.186411, 0.000000, X, Y) && !ellipse(35870.754900, 27794.313200, 519.379215, 272.030408, 48.330000, X, Y) && !ellipse(28163.129761, 26071.994171, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 25 03:58:36 2012] Writing fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2.gif
[Mon Jun 25 04:03:04 2012] Mean detx,y = (-8179.71, -7914.72) 
[Mon Jun 25 04:03:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 04:06:05 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 04:06:05 2012] Setting source spectrum file to fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 25 04:06:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 25 04:37:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 04:37:14 2012] rmf not generated due to insufficient counts
[Mon Jun 25 05:50:05 2012] Updating aperture counts using extracted products
[Mon Jun 25 05:50:05 2012] Error reading totcts from fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 25 05:50:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 05:50:06 2012] Using photon index=1.80, rate=0.044, arf fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2.arf
[Mon Jun 25 05:50:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 05:50:06 2012] Updating source flux to 3.1e-13
[Mon Jun 25 05:51:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 25 05:52:14 2012] xmm0603740301/analysis//spectral/fullrun_pn_xmm0603740301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete