[Mon Jun 25 00:03:35 2012] Detection parameters:
  Position = (366.2, 348.9) = 9 44 43.89 -62 25 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.5 +/- 19.5
  Background counts = 26.3
  Rate = 0.007 +/- 0.0006

[Mon Jun 25 00:03:35 2012] Off-axis axis estimate = 6.12'
[Mon Jun 25 01:03:10 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 01:03:10 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 25 01:03:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 31, frac = 1.078
[Mon Jun 25 01:03:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.49"
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 25 01:36:47 2012] Fit fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 25 01:36:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 25 01:36:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 25 01:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 02:03:12 2012] Source 7 is offset by -1.704387 and 7.655968 pixels which is larger than
2 X fitted extent = 8.727265 x 1.396815, not incorporating fit results
[Mon Jun 25 02:03:12 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 02:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 02:03:12 2012] Assessing source extent using major
[Mon Jun 25 02:03:12 2012] Source does appear to be extended
[Mon Jun 25 02:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 03:03:15 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 03:03:15 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 25 03:03:15 2012] source mask rpix=2.2, npix_max = 28, mask sum = 31, frac = 1.078
[Mon Jun 25 03:03:15 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.49"
[Mon Jun 25 03:33:46 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 25 03:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4.csv
[Mon Jun 25 03:33:46 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 25 03:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4.csv
[Mon Jun 25 03:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 03:33:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 25 03:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 25 03:33:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 25 03:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 25 03:33:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 03:58:24 2012] Spatial fit model total counts = 475.097000, observed total counts = 376.000000
[Mon Jun 25 03:58:24 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 25 03:58:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 03:58:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 03:58:24 2012] Assessing source extent using major
[Mon Jun 25 03:58:24 2012] Source does appear to be extended
[Mon Jun 25 03:58:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 05:03:32 2012] XMMSAS src. selection expression = ellipse(31807.908844, 30308.295197, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 05:03:32 2012] Writing source region out to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 25 05:03:32 2012] Extracting stamp from image fullrun_mos1_xmm0603740301_pi300-10000_cl_sm2.00.img.gz, (329, 311) - (404, 386)
[Mon Jun 25 05:03:32 2012] XMMSAS bgd. selection expression = annulus(31807.908844, 30308.295197, 1087.500000, 2175.000000, X, Y)
[Mon Jun 25 05:03:32 2012] Writing fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7.gif
[Mon Jun 25 05:07:15 2012] Mean detx,y = (4126.57, -6155.44) 
[Mon Jun 25 05:07:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 05:07:35 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 05:07:35 2012] Setting source spectrum file to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 25 05:07:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun 25 05:15:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 25 05:15:47 2012] rmf not generated due to insufficient counts
[Mon Jun 25 05:50:07 2012] Updating aperture counts using extracted products
[Mon Jun 25 05:50:07 2012] Error reading totcts from fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 25 05:50:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 05:50:07 2012] Using photon index=1.80, rate=0.00704, arf fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src7.arf
[Mon Jun 25 05:50:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 05:50:07 2012] Updating source flux to 1.3e-13
[Mon Jun 25 05:50:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting