[Mon Jun 25 00:03:35 2012] Detection parameters:
  Position = (330.3, 293.3) = 9 45 6.35 -62 29 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.6 +/- 13.5
  Background counts = 27.2
  Rate = 0.002 +/- 0.0003

[Mon Jun 25 00:03:35 2012] Off-axis axis estimate = 2.34'
[Mon Jun 25 01:03:10 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 01:03:10 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon Jun 25 01:03:10 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.238
[Mon Jun 25 01:03:10 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.60"
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jun 25 01:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15.csv
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jun 25 01:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15.csv
[Mon Jun 25 01:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jun 25 01:36:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jun 25 01:36:47 2012] Fit fullrun_mos1_xmm0603740301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jun 25 02:03:12 2012] Source 19 is offset by 6.269623 and -7.651743 pixels which is larger than
2 X fitted extent = 2.450051 x 2.450051, not incorporating fit results
[Mon Jun 25 02:03:12 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 02:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 02:03:12 2012] Assessing source extent using major
[Mon Jun 25 02:03:12 2012] Source does appear to be extended
[Mon Jun 25 02:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 03:03:15 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 03:03:15 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon Jun 25 03:03:15 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.238
[Mon Jun 25 03:03:15 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.60"
[Mon Jun 25 03:33:46 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 25 03:33:46 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 25 03:33:46 2012] Fit fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_src14 appears to have run properly
[Mon Jun 25 03:33:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 25 03:33:47 2012] fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 25 03:33:47 2012] Fit fullrun_mos1_xmm0603740301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Jun 25 03:58:24 2012] Source 19 is offset by 6.269623 and -7.651743 pixels which is larger than
2 X fitted extent = 2.450051 x 2.450051, not incorporating fit results
[Mon Jun 25 03:58:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 03:58:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 03:58:24 2012] Assessing source extent using major
[Mon Jun 25 03:58:24 2012] Source does appear to be extended
[Mon Jun 25 03:58:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 05:03:32 2012] XMMSAS src. selection expression = ellipse(28683.579224, 25466.594391, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 25 05:03:32 2012] Writing source region out to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19_src.reg
[Mon Jun 25 05:03:32 2012] Extracting stamp from image fullrun_mos1_xmm0603740301_pi300-10000_cl_sm2.00.img.gz, (293, 256) - (368, 331)
[Mon Jun 25 05:03:32 2012] XMMSAS bgd. selection expression = annulus(28683.579224, 25466.594391, 1087.500000, 2175.000000, X, Y) && !ellipse(26320.690000, 26367.216000, 504.211215, 504.211215, 0.000000, X, Y) && !ellipse(26692.004578, 26830.344879, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 25 05:03:32 2012] Writing fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19.gif
[Mon Jun 25 05:09:32 2012] Mean detx,y = (1387.35, -1166.99) 
[Mon Jun 25 05:09:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 05:09:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 05:09:42 2012] Setting source spectrum file to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jun 25 05:09:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jun 25 05:20:00 2012] Not generating rmf since there are only 84 counts
[Mon Jun 25 05:20:00 2012] rmf not generated due to insufficient counts
[Mon Jun 25 05:50:07 2012] Updating aperture counts using extracted products
[Mon Jun 25 05:50:07 2012] Error reading totcts from fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jun 25 05:50:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 05:50:07 2012] Using photon index=1.80, rate=0.00159, arf fullrun_mos1_xmm0603740301_pi300-10000_pass1_cl_src19.arf
[Mon Jun 25 05:50:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 05:50:07 2012] Updating source flux to 1.9e-14
[Mon Jun 25 05:50:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting