[Wed Jun 12 18:09:14 2013] Detection parameters:
  Position = (313.1, 396.2) = 21 51 1.78 -5 23 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.7 +/- 17.4
  Background counts = 36.9
  Rate = 0.003 +/- 0.0003

[Wed Jun 12 18:09:15 2013] Off-axis axis estimate = 7.16'
[Wed Jun 12 19:45:24 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 19:45:24 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Wed Jun 12 19:45:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.147
[Wed Jun 12 19:45:24 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.01"
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 12 20:24:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 12 20:24:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 12 20:24:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 12 20:24:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 12 20:24:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 12 20:24:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 20:25:13 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.395581 pixels away
[Wed Jun 12 20:25:13 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 20:25:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 20:25:13 2013] Assessing source extent using major
[Wed Jun 12 20:25:13 2013] Source does appear to be extended
[Wed Jun 12 20:25:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 21:36:09 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 21:36:09 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Wed Jun 12 21:36:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.147
[Wed Jun 12 21:36:09 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.01"
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 12 22:11:29 2013] Fit fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 12 22:11:29 2013] Fit fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 12 22:11:44 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.543644 pixels away
[Wed Jun 12 22:11:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 22:11:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 22:11:44 2013] Assessing source extent using major
[Wed Jun 12 22:11:44 2013] Source does appear to be extended
[Wed Jun 12 22:11:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 23:48:43 2013] XMMSAS src. selection expression = ellipse(27192.931610, 34417.529175, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 23:48:43 2013] Writing source region out to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun 12 23:48:43 2013] Extracting stamp from image fullrun_mos2_xmm0603590201_pi300-10000_cl_sm2.00.img.gz, (276, 359) - (351, 434)
[Wed Jun 12 23:48:43 2013] XMMSAS bgd. selection expression = annulus(27192.931610, 34417.529175, 1087.500000, 2175.000000, X, Y) && !ellipse(28479.150000, 32665.881800, 656.092819, 245.607207, 89.776673, X, Y)
[Wed Jun 12 23:48:43 2013] Writing fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9.gif
[Wed Jun 12 23:50:04 2013] Mean detx,y = (-792.04, -9963.03) 
[Wed Jun 12 23:50:04 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 23:50:16 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 23:50:16 2013] Setting source spectrum file to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 12 23:50:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 13 00:06:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 00:06:38 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:16:42 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:16:42 2013] Total counts from fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 391.00
[Thu Jun 13 00:16:42 2013] Total counts from fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1969.00
[Thu Jun 13 00:16:42 2013] Got source and background scale factors 1336000.000000, 10307017.000000
[Thu Jun 13 00:16:42 2013] User source parameters:
  Position = (313.1, 396.2) = 21 51 1.78 -5 23 1.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 135.8 +/- 20.8
  Background aperture counts = 255.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 00:16:42 2013] Updating counts from extracted products
[Thu Jun 13 00:16:42 2013] Set source signif. to 135.78/15.98 = 8.50
[Thu Jun 13 00:16:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:16:45 2013] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9.arf
[Thu Jun 13 00:16:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:16:45 2013] Updating source flux to 2.7e-14
[Thu Jun 13 00:16:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 00:16:51 2013] xmm0603590201/analysis//spectral/fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete