[Wed Jun 12 18:09:14 2013] Detection parameters:
  Position = (186.4, 399.8) = 21 51 38.69 -5 22 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 532.0 +/- 29.1
  Background counts = 36.5
  Rate = 0.01 +/- 0.0007

[Wed Jun 12 18:09:15 2013] Off-axis axis estimate = 10.95'
[Wed Jun 12 19:45:24 2013] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 19:45:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 19:45:24 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Wed Jun 12 19:45:24 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Wed Jun 12 19:45:24 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.90"
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 20:24:57 2013] Fit fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 20:24:57 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 20:24:57 2013] Fit fullrun_mos2_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 12 20:25:13 2013] Spatial fit model total counts = 1114.110000, observed total counts = 1016.000000
[Wed Jun 12 20:25:13 2013] Offset between fit and detection position for source 1 = 0.263233 pixels
[Wed Jun 12 20:25:13 2013] 1112.434000 total counts/ 737.344000 bgd. counts: snr = 13.813394
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.263233 pixels
  Position = (186.5, 399.5) = 21 51 38.67 -5 22 47.2
  Extent = 6.6 (5.9-7.4)" x 4.5 (3.8-5.3)", rotation angle = 332 (317-343) degrees
  Source counts = 375.1 +/- 33.4
  Background counts = 737.3
  Rate = 0.005 +/- 0.0004
[Wed Jun 12 20:25:13 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 20:25:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 20:25:13 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 20:25:13 2013] Source does appear to be extended
[Wed Jun 12 20:25:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Wed Jun 12 21:36:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 21:36:09 2013] Initial guess for spatial extent in simple fitting = 5.56"
[Wed Jun 12 21:36:09 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.712
[Wed Jun 12 21:36:09 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.56"
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 22:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 22:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 22:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 22:11:29 2013] fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 22:11:29 2013] Fit fullrun_mos2_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 12 22:11:44 2013] Spatial fit model total counts = 834.609000, observed total counts = 757.000000
[Wed Jun 12 22:11:44 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 22:11:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 22:11:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 22:11:44 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 22:11:44 2013] Source does appear to be extended
[Wed Jun 12 22:11:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Wed Jun 12 23:48:42 2013] XMMSAS src. selection expression = ellipse(16176.400800, 34708.106400, 396.435611, 270.565808, 331.578071, X, Y)
[Wed Jun 12 23:48:42 2013] Writing source region out to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 23:48:42 2013] Extracting stamp from image fullrun_mos2_xmm0603590201_pi300-10000_cl_sm2.00.img.gz, (164, 377) - (209, 422)
[Wed Jun 12 23:48:43 2013] XMMSAS bgd. selection expression = annulus(16176.400800, 34708.106400, 660.726019, 1321.452038, X, Y)
[Wed Jun 12 23:48:43 2013] Writing fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 23:48:46 2013] Mean detx,y = (-11109.96, -6180.76) 
[Wed Jun 12 23:48:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 23:48:56 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 23:48:56 2013] Setting source spectrum file to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 23:48:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 00:16:41 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:16:41 2013] Total counts from fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 446.00
[Thu Jun 13 00:16:41 2013] Total counts from fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 708.00
[Thu Jun 13 00:16:41 2013] Got source and background scale factors 336000.000000, 3704735.000000
[Thu Jun 13 00:16:41 2013] User source parameters:
  Position = (186.5, 399.5) = 21 51 38.67 -5 22 47.2
  Extent = 6.6 (5.9-7.4)" x 4.5 (3.8-5.3)", rotation angle = 332 (317-343) degrees
  Source aperture counts = 381.8 +/- 22.1
  Background aperture counts = 64.2
  Rate = 0.005 +/- 0.0003

[Thu Jun 13 00:16:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:16:45 2013] Using photon index=1.80, rate=0.00462, arf fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 00:16:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:16:45 2013] Updating source flux to 1.1e-13
[Thu Jun 13 00:16:49 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 00:16:51 2013] xmm0603590201/analysis//spectral/fullrun_mos2_xmm0603590201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete