[Wed Jun 12 18:08:47 2013] Detection parameters:
  Position = (215.3, 286.9) = 21 51 30.28 -5 30 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.0 +/- 19.9
  Background counts = 46.4
  Rate = 0.003 +/- 0.0003

[Wed Jun 12 18:08:47 2013] Off-axis axis estimate = 6.09'
[Wed Jun 12 19:12:03 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 19:12:03 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Wed Jun 12 19:12:03 2013] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.011
[Wed Jun 12 19:12:03 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.47"
[Wed Jun 12 19:45:23 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 12 19:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6.csv
[Wed Jun 12 19:45:23 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 12 19:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6.csv
[Wed Jun 12 19:45:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 19:45:23 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 12 19:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun 12 19:45:23 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 12 19:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun 12 19:45:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603590201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 20:25:09 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.322927 pixels away
[Wed Jun 12 20:25:09 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 20:25:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 20:25:09 2013] Assessing source extent using major
[Wed Jun 12 20:25:09 2013] Source does appear to be extended
[Wed Jun 12 20:25:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 21:08:26 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 21:08:26 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Wed Jun 12 21:08:26 2013] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.011
[Wed Jun 12 21:08:26 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.47"
[Wed Jun 12 21:36:08 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 12 21:36:08 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 12 21:36:08 2013] Fit fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Jun 12 21:36:09 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 12 21:36:09 2013] fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 12 21:36:09 2013] Fit fullrun_mos1_xmm0603590201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jun 12 22:11:40 2013] Spatial fit model total counts = 628.668000, observed total counts = 620.000000
[Wed Jun 12 22:11:40 2013] Offset between fit and detection position for source 17 = 0.098606 pixels
[Wed Jun 12 22:11:40 2013] 629.004000 total counts/ 494.217000 bgd. counts: snr = 6.063022
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.098606 pixels
  Position = (215.2, 286.8) = 21 51 30.31 -5 30 57.4
  Extent = 4.2 (3.1-5.1)", rotation angle = 0
  Source counts = 134.8 +/- 25.1
  Background counts = 494.2
  Rate = 0.002 +/- 0.0003
[Wed Jun 12 22:11:40 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 22:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 22:11:40 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 22:11:40 2013] Source does appear to be extended
[Wed Jun 12 22:11:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 23:20:09 2013] XMMSAS src. selection expression = ellipse(18675.093780, 24905.250800, 251.501407, 251.501407, 0.000000, X, Y)
[Wed Jun 12 23:20:09 2013] Writing source region out to fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 12 23:20:09 2013] Extracting stamp from image fullrun_mos1_xmm0603590201_pi300-10000_cl_sm2.00.img.gz, (201, 272) - (230, 301)
[Wed Jun 12 23:20:09 2013] XMMSAS bgd. selection expression = annulus(18675.093780, 24905.250800, 419.169012, 838.338024, X, Y)
[Wed Jun 12 23:20:09 2013] Writing fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17.gif
[Wed Jun 12 23:21:00 2013] Mean detx,y = (2187.52, 4999.02) 
[Wed Jun 12 23:21:01 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 23:21:05 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 23:21:05 2013] Setting source spectrum file to fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 12 23:21:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jun 13 00:16:39 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:16:39 2013] Total counts from fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 190.00
[Thu Jun 13 00:16:39 2013] Total counts from fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 389.00
[Thu Jun 13 00:16:39 2013] Got source and background scale factors 195200.000000, 1554804.000000
[Thu Jun 13 00:16:39 2013] User source parameters:
  Position = (215.2, 286.8) = 21 51 30.31 -5 30 57.4
  Extent = 4.2 (3.1-5.1)", rotation angle = 0
  Source aperture counts = 141.2 +/- 14.8
  Background aperture counts = 48.8
  Rate = 0.002 +/- 0.0002

[Thu Jun 13 00:16:41 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:16:41 2013] Using photon index=1.80, rate=0.00166, arf fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17.arf
[Thu Jun 13 00:16:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:16:41 2013] Updating source flux to 3e-14
[Thu Jun 13 00:16:49 2013] xmm0603590201/analysis//spectral/fullrun_mos1_xmm0603590201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete