[Tue Aug 21 02:15:59 2012] Detection parameters:
  Position = (252.3, 179.6) = 21 50 39.49 -5 53 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.2 +/- 27.4
  Background counts = 57.5
  Rate = 0.01 +/- 0.0007

[Tue Aug 21 02:16:00 2012] Off-axis axis estimate = 9.24'
[Tue Aug 21 05:34:54 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 05:34:54 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Tue Aug 21 05:34:54 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Tue Aug 21 05:34:54 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.05"
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 21 06:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 21 06:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 21 06:45:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 21 06:45:22 2012] Fit fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Aug 21 06:46:00 2012] Warning, spatial fit 4 centroid is now closest to src. 34
[Tue Aug 21 06:46:00 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 06:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 06:46:00 2012] Assessing source extent using major
[Tue Aug 21 06:46:00 2012] Source does appear to be extended
[Tue Aug 21 06:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 09:27:31 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 09:27:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 09:27:31 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Tue Aug 21 09:27:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Tue Aug 21 09:27:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.05"
[Tue Aug 21 10:39:42 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Aug 21 10:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 10:39:42 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Aug 21 10:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 10:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 10:39:43 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Aug 21 10:39:43 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Aug 21 10:39:43 2012] Fit fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Aug 21 10:40:24 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.574521 pixels away
[Tue Aug 21 10:40:24 2012] Spatial fit model total counts = 642.571000, observed total counts = 643.000000
[Tue Aug 21 10:40:24 2012] Offset between fit and detection position for source 3 = 2.779339 pixels
[Tue Aug 21 10:40:24 2012] Warning, changing simple spatial fit ID from 4 to 18
[Tue Aug 21 10:40:24 2012] 634.769000 total counts/ 504.275000 bgd. counts: snr = 5.811080
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.779339 pixels
  Position = (255.0, 179.0) = 21 50 38.70 -5 53 38.6
  Extent = 22.1 (19.4-44.2)" x 3.3 (2.8-4.2)", rotation angle = 21 (18-24) degrees
  Source counts = 130.5 +/- 25.2
  Background counts = 504.3
  Rate = 0.002 +/- 0.0003
[Tue Aug 21 10:40:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 10:40:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 10:40:24 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 10:40:24 2012] Source does appear to be extended
[Tue Aug 21 10:40:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.60
[Tue Aug 21 10:40:24 2012] Source is asymmetric
[Tue Aug 21 10:40:24 2012] Source is confused with source 34
[Tue Aug 21 14:28:35 2012] XMMSAS src. selection expression = ellipse(22139.146000, 15523.063800, 1327.050038, 200.789406, 20.822000, X, Y)
[Tue Aug 21 14:28:35 2012] Writing source region out to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 21 14:28:35 2012] Extracting stamp from image fullrun_mos2_xmm0603590101_pi300-10000_cl_sm2.00.img.gz, (179, 103) - (331, 255)
[Tue Aug 21 14:28:35 2012] XMMSAS bgd. selection expression = annulus(22139.146000, 15523.063800, 2211.750064, 4423.500127, X, Y) && !ellipse(17683.421640, 15914.432400, 534.502754, 534.502754, 0.000000, X, Y) && !ellipse(26992.748640, 18516.276000, 441.684813, 382.006411, 354.804970, X, Y) && !ellipse(22747.313385, 19678.098190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22668.172272, 17370.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.082916, 11975.106827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22717.539886, 15273.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.694122, 14175.762375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.325073, 10315.892731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22950.104523, 12304.841553, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 14:28:35 2012] Writing fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3.gif
[Tue Aug 21 14:35:10 2012] Mean detx,y = (1602.00, 9448.36) 
[Tue Aug 21 14:35:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 14:36:20 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 14:36:20 2012] Setting source spectrum file to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 14:36:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 21 15:40:27 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:40:27 2012] Error reading totcts from fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 21 15:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:40:29 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src3.arf
[Tue Aug 21 15:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:40:29 2012] Updating source flux to 3.5e-14
[Tue Aug 21 15:44:07 2012] Flag c found in src. 3 procflags, skipping spectral fitting