[Tue Aug 21 02:15:58 2012] Detection parameters:
  Position = (203.7, 183.2) = 21 50 53.68 -5 53 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4451.1 +/- 80.5
  Background counts = 79.1
  Rate = 0.05 +/- 0.001

[Tue Aug 21 02:16:00 2012] Off-axis axis estimate = 10.82'
[Tue Aug 21 05:34:54 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 05:34:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 05:34:54 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Tue Aug 21 05:34:54 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Tue Aug 21 05:34:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.84"
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 06:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 06:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 06:45:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 06:45:22 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 06:45:22 2012] Fit fullrun_mos2_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 06:46:00 2012] Spatial fit model total counts = 5134.000000, observed total counts = 5134.000000
[Tue Aug 21 06:46:00 2012] Offset between fit and detection position for source 1 = 0.313754 pixels
[Tue Aug 21 06:46:00 2012] 5159.810000 total counts/ 1843.360000 bgd. counts: snr = 77.244644
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.313754 pixels
  Position = (203.8, 183.5) = 21 50 53.63 -5 53 18.9
  Extent = 7.1 (6.8-7.2)", rotation angle = 0
  Source counts = 3316.4 +/- 71.8
  Background counts = 1843.4
  Rate = 0.04 +/- 0.0009
[Tue Aug 21 06:46:00 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 06:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 06:46:00 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 06:46:00 2012] Source does appear to be extended
[Tue Aug 21 06:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 09:27:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 09:27:31 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Tue Aug 21 09:27:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Tue Aug 21 09:27:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.05"
[Tue Aug 21 10:39:42 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 10:39:42 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 10:39:42 2012] Fit fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Aug 21 10:39:43 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 10:39:43 2012] fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 10:39:43 2012] Fit fullrun_mos2_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 10:40:24 2012] Spatial fit model total counts = 4482.040000, observed total counts = 4478.000000
[Tue Aug 21 10:40:24 2012] Offset between fit and detection position for source 1 = 0.020861 pixels
[Tue Aug 21 10:40:24 2012] 4504.540000 total counts/ 1336.260000 bgd. counts: snr = 86.671851
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020861 pixels
  Position = (203.8, 183.5) = 21 50 53.64 -5 53 19.0
  Extent = 6.7 (6.5-6.9)", rotation angle = 0
  Source counts = 3168.3 +/- 67.1
  Background counts = 1336.3
  Rate = 0.04 +/- 0.0009
[Tue Aug 21 10:40:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 10:40:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 10:40:24 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 10:40:24 2012] Source does appear to be extended
[Tue Aug 21 10:40:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 14:28:35 2012] Counts = 3168.280000, rescaling region sizes by 2.000000
[Tue Aug 21 14:28:35 2012] XMMSAS src. selection expression = ellipse(17683.421640, 15914.432400, 801.754131, 801.754131, 0.000000, X, Y)
[Tue Aug 21 14:28:35 2012] Writing source region out to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 14:28:35 2012] Extracting stamp from image fullrun_mos2_xmm0603590101_pi300-10000_cl_sm2.00.img.gz, (158, 137) - (250, 230)
[Tue Aug 21 14:28:35 2012] XMMSAS bgd. selection expression = annulus(17683.421640, 15914.432400, 2672.513769, 5345.027537, X, Y) && !ellipse(21368.904480, 21118.425034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.146000, 15523.063800, 1769.400051, 267.719208, 20.822000, X, Y) && !ellipse(22747.313385, 19678.098190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22668.172272, 17370.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17687.154114, 21627.949051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22717.539886, 15273.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.694122, 14175.762375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.325073, 10315.892731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22950.104523, 12304.841553, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 14:28:35 2012] Writing fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 14:28:46 2012] Mean detx,y = (-2585.91, 10755.20) 
[Tue Aug 21 14:28:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 14:30:12 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 14:30:12 2012] Setting source spectrum file to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 14:30:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 15:40:27 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:40:27 2012] Error reading totcts from fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 15:40:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:40:28 2012] Using photon index=1.80, rate=0.0409, arf fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:40:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:40:28 2012] Updating source flux to 8.1e-13
[Tue Aug 21 15:45:57 2012] Reading fit data from xmm0603590101/analysis//spectral/fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 15:45:57 2012] Spectral fit parameter nH value = 3.92029e+21
[Tue Aug 21 15:45:57 2012] Spectral fit parameter PhoIndex value = 5.06652
[Tue Aug 21 15:45:57 2012] Failed to get F(0.3-8.0) from xmm0603590101/analysis//spectral/fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 15:45:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:45:57 2012] Using Nh = 3.9e+21, photon index=5.07, rate=0.0409, arf fullrun_mos2_xmm0603590101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:45:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:45:57 2012] Updating source flux to 5e-13