[Tue Aug 21 02:15:23 2012] Detection parameters:
  Position = (203.8, 183.3) = 21 50 53.64 -5 53 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5235.0 +/- 87.2
  Background counts = 70.2
  Rate = 0.1 +/- 0.002

[Tue Aug 21 02:15:24 2012] Off-axis axis estimate = 10.81'
[Tue Aug 21 04:15:45 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 04:15:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 04:15:45 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Tue Aug 21 04:15:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.013
[Tue Aug 21 04:15:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.83"
[Tue Aug 21 05:34:53 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 05:34:53 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 05:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 05:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 05:34:54 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 05:34:54 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 05:34:54 2012] Fit fullrun_mos1_xmm0603590101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 06:45:50 2012] Spatial fit model total counts = 5758.000000, observed total counts = 5758.000000
[Tue Aug 21 06:45:51 2012] Offset between fit and detection position for source 1 = 0.311389 pixels
[Tue Aug 21 06:45:51 2012] 5783.840000 total counts/ 1812.580000 bgd. counts: snr = 93.278108
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.311389 pixels
  Position = (203.8, 183.6) = 21 50 53.63 -5 53 18.5
  Extent = 7.1 (6.9-7.2)", rotation angle = 0
  Source counts = 3971.3 +/- 76.1
  Background counts = 1812.6
  Rate = 0.05 +/- 0.001
[Tue Aug 21 06:45:51 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 06:45:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 06:45:51 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 06:45:51 2012] Source does appear to be extended
[Tue Aug 21 06:45:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 08:28:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 08:28:33 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Tue Aug 21 08:28:33 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.109
[Tue Aug 21 08:28:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.06"
[Tue Aug 21 09:27:30 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 09:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 09:27:30 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 09:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 09:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 09:27:30 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 09:27:30 2012] fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 09:27:30 2012] Fit fullrun_mos1_xmm0603590101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 10:40:14 2012] Spatial fit model total counts = 5173.000000, observed total counts = 5173.000000
[Tue Aug 21 10:40:14 2012] Offset between fit and detection position for source 1 = 0.005979 pixels
[Tue Aug 21 10:40:14 2012] 5171.110000 total counts/ 1425.020000 bgd. counts: snr = 99.235652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005979 pixels
  Position = (203.8, 183.6) = 21 50 53.63 -5 53 18.5
  Extent = 6.6 (6.4-6.8)", rotation angle = 0
  Source counts = 3746.1 +/- 71.9
  Background counts = 1425.0
  Rate = 0.05 +/- 0.0009
[Tue Aug 21 10:40:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 10:40:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 10:40:14 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 10:40:14 2012] Source does appear to be extended
[Tue Aug 21 10:40:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:11:40 2012] Counts = 3746.090000, rescaling region sizes by 2.000000
[Tue Aug 21 13:11:40 2012] XMMSAS src. selection expression = ellipse(17686.111080, 15925.549200, 790.380023, 790.380023, 0.000000, X, Y)
[Tue Aug 21 13:11:40 2012] Writing source region out to fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 13:11:40 2012] Extracting stamp from image fullrun_mos1_xmm0603590101_pi300-10000_cl_sm2.00.img.gz, (158, 138) - (249, 229)
[Tue Aug 21 13:11:40 2012] XMMSAS bgd. selection expression = annulus(17686.111080, 15925.549200, 2634.600076, 5269.200152, X, Y) && !ellipse(21369.829420, 21143.452600, 391.729611, 391.729611, 0.000000, X, Y) && !ellipse(21921.894680, 15585.818156, 590.469917, 455.730243, 20.856919, X, Y) && !ellipse(22721.214447, 19591.994263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22651.403107, 17424.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.772430, 14158.391846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21908.754242, 14750.869598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15197.456146, 21625.506424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18681.047200, 17755.277400, 1099.248032, 540.291216, 65.152229, X, Y) && !ellipse(22676.251526, 15283.143234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.260200, 19555.367000, 527.980015, 527.980015, 0.000000, X, Y) && !ellipse(23111.514374, 10357.739311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18070.858948, 13468.785156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.069794, 12255.550934, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:11:40 2012] Writing fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 13:11:51 2012] Mean detx,y = (10946.48, 2478.53) 
[Tue Aug 21 13:11:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:13:01 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:13:01 2012] Setting source spectrum file to fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 13:13:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 15:40:23 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:40:23 2012] Error reading totcts from fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 15:40:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:40:25 2012] Using photon index=1.80, rate=0.0486, arf fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:40:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:40:25 2012] Updating source flux to 8.5e-13
[Tue Aug 21 15:44:07 2012] Reading fit data from xmm0603590101/analysis//spectral/fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 15:44:07 2012] Spectral fit parameter nH value = 2.87973e+21
[Tue Aug 21 15:44:07 2012] Spectral fit parameter PhoIndex value = 4.50856
[Tue Aug 21 15:44:07 2012] Failed to get F(0.3-8.0) from xmm0603590101/analysis//spectral/fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 15:44:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:44:07 2012] Using Nh = 2.9e+21, photon index=4.51, rate=0.0486, arf fullrun_mos1_xmm0603590101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:44:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:44:07 2012] Updating source flux to 5.4e-13