[Mon Jun 11 11:52:53 2012] Detection parameters:
  Position = (303.9, 291.2) = 2 22 45.08 41 29 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1195.4 +/- 42.2
  Background counts = 47.4
  Rate = 0.05 +/- 0.002

[Mon Jun 11 11:52:53 2012] Off-axis axis estimate = 0.66'
[Mon Jun 11 11:54:49 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:54:49 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Mon Jun 11 11:54:49 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Mon Jun 11 11:54:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.76"
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 11 12:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 11 12:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 11 12:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 11 12:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 11 12:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 11 12:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 13:15:48 2012] Spatial fit model total counts = 1712.210000, observed total counts = 1517.000000
[Mon Jun 11 13:15:48 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 11 13:15:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 13:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 13:15:48 2012] Assessing source extent using major
[Mon Jun 11 13:15:48 2012] Source does appear to be extended
[Mon Jun 11 13:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 13:16:03 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:16:03 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Mon Jun 11 13:16:03 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Mon Jun 11 13:16:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.76"
[Mon Jun 11 13:44:11 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 11 13:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 11 13:44:11 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 11 13:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 11 13:44:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 11 13:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:25:57 2012] Spatial fit model total counts = 1712.510000, observed total counts = 1517.000000
[Mon Jun 11 14:25:57 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 11 14:25:57 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:25:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:25:57 2012] Assessing source extent using major
[Mon Jun 11 14:25:57 2012] Source does appear to be extended
[Mon Jun 11 14:25:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:26:11 2012] Counts = 1195.358398, rescaling region sizes by 2.000000
[Mon Jun 11 14:26:11 2012] XMMSAS src. selection expression = ellipse(26393.050934, 25288.906555, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 11 14:26:11 2012] Writing source region out to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 11 14:26:11 2012] Extracting stamp from image fullrun_pn_xmm0603570401_pi300-10000_cl_sm2.00.img.gz, (229, 216) - (379, 366)
[Mon Jun 11 14:26:11 2012] XMMSAS bgd. selection expression = annulus(26393.050934, 25288.906555, 4350.000000, 8700.000000, X, Y) && !ellipse(32535.490417, 20659.880234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.945060, 24549.259400, 414.307212, 414.307212, 0.000000, X, Y) && !ellipse(22566.312073, 34294.346436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17507.947601, 32253.096191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28733.613251, 23410.916718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.303600, 16507.410400, 475.391214, 475.391214, 0.000000, X, Y) && !ellipse(21237.005280, 16283.027267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24321.339940, 32445.698600, 399.916812, 399.916812, 0.000000, X, Y) && !ellipse(27380.318000, 30629.075400, 342.769610, 342.769610, 0.000000, X, Y) && !ellipse(28540.308533, 28926.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17806.303864, 27628.712189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20768.824051, 26562.672791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.610382, 26487.713348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24840.002167, 24339.691101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.646454, 22043.358917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.423630, 21785.859573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23089.753754, 21252.367279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.512726, 18433.409836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.307880, 17927.704400, 415.207212, 415.207212, 0.000000, X, Y) && !ellipse(21120.839783, 16643.793976, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 14:26:11 2012] Writing fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3.gif
[Mon Jun 11 14:29:18 2012] Mean detx,y = (-1646.36, 1015.06) 
[Mon Jun 11 14:29:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 14:31:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 14:31:06 2012] Setting source spectrum file to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 11 14:31:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 11 14:50:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 14:50:19 2012] rmf not generated due to insufficient counts
[Mon Jun 11 15:24:29 2012] Updating aperture counts using extracted products
[Mon Jun 11 15:24:29 2012] Error reading totcts from fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 11 15:24:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 15:24:29 2012] Using photon index=1.80, rate=0.0481, arf fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src3.arf
[Mon Jun 11 15:24:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 15:24:29 2012] Updating source flux to 1.4e-13
[Mon Jun 11 15:24:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting