[Mon Jun 11 11:52:53 2012] Detection parameters:
  Position = (326.0, 305.0) = 2 22 36.55 41 30 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.1 +/- 17.4
  Background counts = 45.5
  Rate = 0.006 +/- 0.0008

[Mon Jun 11 11:52:53 2012] Off-axis axis estimate = 2.05'
[Mon Jun 11 11:54:49 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:54:49 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Mon Jun 11 11:54:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon Jun 11 11:54:49 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.45"
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jun 11 12:29:52 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jun 11 12:29:52 2012] Fit fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_src27 appears to have run properly
[Mon Jun 11 12:29:53 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jun 11 12:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jun 11 12:29:53 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jun 11 12:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jun 11 12:29:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 13:15:48 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 16.534964 pixels away
[Mon Jun 11 13:15:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 13:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 13:15:48 2012] Assessing source extent using major
[Mon Jun 11 13:15:48 2012] Source does appear to be extended
[Mon Jun 11 13:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 13:16:03 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 13:16:03 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Mon Jun 11 13:16:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon Jun 11 13:16:03 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.45"
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27.csv
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27.csv
[Mon Jun 11 13:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 11 13:44:12 2012] fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 11 13:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 11 13:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603570401_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 14:25:57 2012] Spatial fit model total counts = 596.829000, observed total counts = 527.000000
[Mon Jun 11 14:25:57 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 11 14:25:57 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 14:25:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 14:25:57 2012] Assessing source extent using major
[Mon Jun 11 14:25:57 2012] Source does appear to be extended
[Mon Jun 11 14:25:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 14:26:11 2012] XMMSAS src. selection expression = ellipse(28309.610382, 26487.713348, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 11 14:26:11 2012] Writing source region out to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28_src.reg
[Mon Jun 11 14:26:11 2012] Extracting stamp from image fullrun_pn_xmm0603570401_pi300-10000_cl_sm2.00.img.gz, (288, 268) - (363, 343)
[Mon Jun 11 14:26:11 2012] XMMSAS bgd. selection expression = annulus(28309.610382, 26487.713348, 1087.500000, 2175.000000, X, Y) && !ellipse(26393.050934, 25288.906555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.308533, 28926.971069, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 14:26:11 2012] Writing fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28.gif
[Mon Jun 11 14:42:07 2012] Mean detx,y = (-3158.04, 2710.65) 
[Mon Jun 11 14:42:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 14:42:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 14:42:23 2012] Setting source spectrum file to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Jun 11 14:42:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon Jun 11 14:55:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 14:55:50 2012] rmf not generated due to insufficient counts
[Mon Jun 11 15:24:29 2012] Updating aperture counts using extracted products
[Mon Jun 11 15:24:29 2012] Error reading totcts from fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Jun 11 15:24:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 15:24:29 2012] Using photon index=1.80, rate=0.0063, arf fullrun_pn_xmm0603570401_pi300-10000_pass1_cl_src28.arf
[Mon Jun 11 15:24:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 15:24:29 2012] Updating source flux to 2e-14
[Mon Jun 11 15:24:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting