[Mon Jul  9 03:54:14 2012] Detection parameters:
  Position = (128.8, 330.0) = 8 32 40.54 -46 18 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.5 +/- 18.6
  Background counts = 55.3
  Rate = 0.003 +/- 0.0004

[Mon Jul  9 03:54:14 2012] Off-axis axis estimate = 12.51'
[Mon Jul  9 10:21:27 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 10:21:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 10:21:27 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Mon Jul  9 10:21:27 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Mon Jul  9 10:21:27 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.68"
[Mon Jul  9 11:07:49 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jul  9 11:07:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9.csv
[Mon Jul  9 11:07:49 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jul  9 11:07:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9.csv
[Mon Jul  9 11:07:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 11:07:50 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jul  9 11:07:50 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jul  9 11:07:50 2012] Fit fullrun_mos2_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jul  9 11:08:22 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.946582 pixels away
[Mon Jul  9 11:08:22 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 11:08:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 11:08:22 2012] Assessing source extent using major
[Mon Jul  9 11:08:22 2012] Source does appear to be extended
[Mon Jul  9 11:08:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 15:19:59 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 15:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 15:19:59 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Mon Jul  9 15:19:59 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Mon Jul  9 15:19:59 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.68"
[Mon Jul  9 15:41:20 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul  9 15:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7.csv
[Mon Jul  9 15:41:20 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul  9 15:41:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7.csv
[Mon Jul  9 15:41:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 15:41:20 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul  9 15:41:20 2012] fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul  9 15:41:20 2012] Fit fullrun_mos2_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul  9 15:41:41 2012] Spatial fit model total counts = 707.319000, observed total counts = 701.000000
[Mon Jul  9 15:41:41 2012] Offset between fit and detection position for source 1 = 0.135106 pixels
[Mon Jul  9 15:41:41 2012] 711.218000 total counts/ 609.073000 bgd. counts: snr = 4.138876
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.135106 pixels
  Position = (128.9, 330.0) = 8 32 40.48 -46 18 9.0
  Extent = 5.8 (4.6-7.5)", rotation angle = 0
  Source counts = 102.1 +/- 26.7
  Background counts = 609.1
  Rate = 0.002 +/- 0.0006
[Mon Jul  9 15:41:41 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 15:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 15:41:41 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 15:41:41 2012] Source does appear to be extended
[Mon Jul  9 15:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 18:49:35 2012] XMMSAS src. selection expression = ellipse(11168.753600, 28659.555400, 347.568610, 347.568610, 0.000000, X, Y)
[Mon Jul  9 18:49:35 2012] Writing source region out to fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 18:49:35 2012] Extracting stamp from image fullrun_mos2_xmm0603510901_pi300-10000_cl_sm2.00.img.gz, (109, 310) - (149, 350)
[Mon Jul  9 18:49:35 2012] XMMSAS bgd. selection expression = annulus(11168.753600, 28659.555400, 579.281017, 1158.562033, X, Y)
[Mon Jul  9 18:49:35 2012] Writing fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 18:51:32 2012] Mean detx,y = (8615.09, 11411.07) 
[Mon Jul  9 18:51:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 18:51:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 18:51:41 2012] Setting source spectrum file to fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 18:51:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 19:06:56 2012] Updating aperture counts using extracted products
[Mon Jul  9 19:06:56 2012] Error reading totcts from fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 19:06:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 19:06:56 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 19:06:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 19:06:56 2012] Updating source flux to 8.8e-14
[Mon Jul  9 19:13:21 2012] Reading fit data from xmm0603510901/analysis//spectral/fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 19:13:21 2012] Spectral fit parameter nH value = 1.00425e+22
[Mon Jul  9 19:13:21 2012] Spectral fit parameter PhoIndex value = 9.9724
[Mon Jul  9 19:13:21 2012] Failed to get F(0.3-8.0) from xmm0603510901/analysis//spectral/fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 19:13:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 19:13:21 2012] Using Nh = 1e+22, photon index=9.97, rate=0.0022, arf fullrun_mos2_xmm0603510901_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 19:13:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 19:13:21 2012] Updating source flux to 5e-14