[Mon Jul  9 03:53:55 2012] Detection parameters:
  Position = (368.1, 349.4) = 8 31 0.12 -46 16 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.4 +/- 21.5
  Background counts = 166.5
  Rate = 0.002 +/- 0.0006

[Mon Jul  9 03:53:56 2012] Off-axis axis estimate = 6.25'
[Mon Jul  9 09:34:55 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 09:34:55 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Mon Jul  9 09:34:55 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Mon Jul  9 09:34:55 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.56"
[Mon Jul  9 10:21:27 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jul  9 10:21:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13.csv
[Mon Jul  9 10:21:27 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jul  9 10:21:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13.csv
[Mon Jul  9 10:21:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 10:21:27 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jul  9 10:21:27 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jul  9 10:21:27 2012] Fit fullrun_mos1_xmm0603510901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jul  9 11:08:18 2012] Warning, spatial fit 13 centroid is now closest to src. 7
[Mon Jul  9 11:08:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 11:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 11:08:18 2012] Assessing source extent using major
[Mon Jul  9 11:08:18 2012] Source does appear to be extended
[Mon Jul  9 11:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 11:08:18 2012] Source is confused with source 7
[Mon Jul  9 14:48:35 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 14:48:35 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Mon Jul  9 14:48:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Mon Jul  9 14:48:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.56"
[Mon Jul  9 15:19:58 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jul  9 15:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9.csv
[Mon Jul  9 15:19:58 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jul  9 15:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9.csv
[Mon Jul  9 15:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 15:19:58 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jul  9 15:19:58 2012] fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jul  9 15:19:58 2012] Fit fullrun_mos1_xmm0603510901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jul  9 15:41:38 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.927684 pixels away
[Mon Jul  9 15:41:38 2012] Spatial fit model total counts = 2020.450000, observed total counts = 1907.000000
[Mon Jul  9 15:41:38 2012] Offset between fit and detection position for source 8 = 5.468010 pixels
[Mon Jul  9 15:41:38 2012] 1944.039000 total counts/ 1592.560000 bgd. counts: snr = 8.807476
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.468010 pixels
  Position = (372.7, 346.4) = 8 30 58.18 -46 16 58.5
  Extent = 19.1 (19.0-38.2)", rotation angle = 0
  Source counts = 351.5 +/- 44.1
  Background counts = 1592.6
  Rate = 0.008 +/- 0.0009
[Mon Jul  9 15:41:38 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 15:41:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 15:41:38 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 15:41:38 2012] Source does appear to be extended
[Mon Jul  9 15:41:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 18:25:18 2012] XMMSAS src. selection expression = ellipse(32373.276000, 30092.464000, 1146.714033, 1146.714033, 0.000000, X, Y)
[Mon Jul  9 18:25:18 2012] Writing source region out to fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8_src.reg
[Mon Jul  9 18:25:18 2012] Extracting stamp from image fullrun_mos1_xmm0603510901_pi300-10000_cl_sm2.00.img.gz, (307, 281) - (439, 412)
[Mon Jul  9 18:25:18 2012] XMMSAS bgd. selection expression = annulus(32373.276000, 30092.464000, 1911.190055, 3822.380110, X, Y) && !ellipse(31556.794000, 30649.814000, 1528.952044, 1528.952044, 0.000000, X, Y) && !ellipse(31098.824860, 28662.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.864800, 27231.792000, 1293.648037, 1293.648037, 0.000000, X, Y) && !ellipse(31352.514000, 29084.074000, 1419.664041, 1419.664041, 0.000000, X, Y) && !ellipse(32643.709412, 26677.763000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.767244, 26382.979600, 650.705619, 650.705619, 0.000000, X, Y) && !ellipse(31376.030000, 29521.361580, 1406.096040, 1406.096040, 0.000000, X, Y) && !ellipse(30702.136932, 27791.964630, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 18:25:18 2012] Writing fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8.gif
[Mon Jul  9 18:28:33 2012] Mean detx,y = (-3655.49, 5844.58) 
[Mon Jul  9 18:28:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 18:29:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 18:29:06 2012] Setting source spectrum file to fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul  9 18:29:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jul  9 19:06:56 2012] Updating aperture counts using extracted products
[Mon Jul  9 19:06:56 2012] Error reading totcts from fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul  9 19:06:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 19:06:56 2012] Using photon index=1.80, rate=0.00756, arf fullrun_mos1_xmm0603510901_pi300-10000_pass1_cl_src8.arf
[Mon Jul  9 19:06:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 19:06:56 2012] Updating source flux to 8.9e-14
[Mon Jul  9 19:06:58 2012] Flag c found in src. 8 procflags, skipping spectral fitting