[Wed Jul  4 18:23:02 2012] Detection parameters:
  Position = (104.1, 299.4) = 8 40 51.19 -45 47 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.7 +/- 74.1
  Background counts = 365.1
  Rate = 0.006 +/- 0.0009

[Wed Jul  4 18:23:03 2012] Off-axis axis estimate = 14.09'
[Wed Jul  4 18:29:52 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 18:29:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 18:29:52 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Wed Jul  4 18:29:52 2012] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.754
[Wed Jul  4 18:29:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.47"
[Wed Jul  4 19:10:49 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul  4 19:10:49 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul  4 19:10:49 2012] Fit fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Jul  4 19:10:49 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul  4 19:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jul  4 19:10:49 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul  4 19:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jul  4 19:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 19:41:15 2012] Warning, spatial fit 3 centroid is now closest to src. 28
[Wed Jul  4 19:41:15 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 19:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 19:41:15 2012] Assessing source extent using major
[Wed Jul  4 19:41:15 2012] Source does appear to be extended
[Wed Jul  4 19:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 19:41:15 2012] Source is confused with source 25
[Wed Jul  4 19:41:15 2012] Source is confused with source 27
[Wed Jul  4 19:41:15 2012] Source is confused with source 29
[Wed Jul  4 19:41:26 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 19:41:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 19:41:26 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Wed Jul  4 19:41:26 2012] source mask rpix=3.1, npix_max = 51, mask sum = 39, frac = 0.754
[Wed Jul  4 19:41:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.47"
[Wed Jul  4 21:56:34 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul  4 21:56:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3.csv
[Wed Jul  4 21:56:34 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul  4 21:56:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3.csv
[Wed Jul  4 21:56:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 21:56:34 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul  4 21:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jul  4 21:56:34 2012] fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul  4 21:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jul  4 21:56:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 22:30:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.661007 pixels away
[Wed Jul  4 22:30:27 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 24.233815 pixels away
[Wed Jul  4 22:30:27 2012] Spatial fit model total counts = 16366.300000, observed total counts = 15597.000000
[Wed Jul  4 22:30:27 2012] Offset between fit and detection position for source 6 = 4.646545 pixels
[Wed Jul  4 22:30:27 2012] Warning, changing simple spatial fit ID from 3 to 23
[Wed Jul  4 22:30:27 2012] 15309.590000 total counts/ 14259.800000 bgd. counts: snr = 8.791150
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.646545 pixels
  Position = (107.5, 302.6) = 8 40 49.80 -45 47 30.5
  Extent = 38.6 (38.6-77.3)", rotation angle = 0
  Source counts = 1049.8 +/- 123.7
  Background counts = 14259.8
  Rate = 0.01 +/- 0.002
[Wed Jul  4 22:30:27 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 22:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 22:30:27 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 22:30:27 2012] Source does appear to be extended
[Wed Jul  4 22:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 22:30:37 2012] Counts = 1049.790000, rescaling region sizes by 2.000000
[Wed Jul  4 22:30:37 2012] XMMSAS src. selection expression = ellipse(9301.620000, 26279.288000, 4635.864133, 4635.864133, 0.000000, X, Y)
[Wed Jul  4 22:30:37 2012] Writing source region out to fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul  4 22:30:37 2012] Extracting stamp from image fullrun_pn_xmm0603510701_pi300-10000_cl_sm2.00.img.gz, (0, 36) - (374, 569)
[Wed Jul  4 22:30:37 2012] XMMSAS bgd. selection expression = annulus(9301.620000, 26279.288000, 15452.880445, 30905.760889, X, Y) && !ellipse(32388.715088, 15288.523651, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29070.884277, 31402.541626, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(36330.116699, 23856.053619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34478.000122, 16333.083862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23760.138031, 30466.996918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.386627, 25075.070496, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(11309.619751, 32101.350647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30339.528961, 42312.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.907471, 40560.741272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20653.851990, 40356.136749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18872.499908, 37869.813324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23518.984375, 34940.527466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25516.848785, 13814.661133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.443940, 31624.115200, 405.208812, 405.208812, 0.000000, X, Y) && !ellipse(29421.775604, 29362.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.967438, 29190.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33840.147919, 28760.673309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24288.911011, 28653.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23610.378920, 28267.016400, 383.561611, 383.561611, 0.000000, X, Y) && !ellipse(9614.468506, 28046.818237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9318.761299, 27598.394409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8391.941017, 27499.497223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25755.016000, 27535.181000, 398.164811, 398.164811, 0.000000, X, Y) && !ellipse(9297.116860, 26928.436000, 2140.696062, 2140.696062, 0.000000, X, Y) && !ellipse(26531.965200, 26692.454400, 434.221612, 434.221612, 0.000000, X, Y) && !ellipse(9284.042809, 25588.300934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8666.559800, 24755.778000, 1545.288044, 1545.288044, 0.000000, X, Y) && !ellipse(8850.708000, 24909.402000, 2147.544062, 2147.544062, 0.000000, X, Y) && !ellipse(23811.526123, 20596.158203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.081787, 20221.976959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26175.242400, 17349.052000, 365.437133, 365.437133, 0.000000, X, Y) && !ellipse(18439.022568, 26839.390564, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27459.063782, 22946.695465, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(21721.002518, 42930.787689, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 22:30:37 2012] Writing fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6.gif
[Wed Jul  4 22:49:45 2012] Mean detx,y = (-12481.44, -10092.79) 
[Wed Jul  4 22:49:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 22:57:20 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 22:57:21 2012] Setting source spectrum file to fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 22:57:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul  5 00:40:17 2012] Updating aperture counts using extracted products
[Thu Jul  5 00:40:17 2012] Error reading totcts from fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul  5 00:40:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 00:40:18 2012] Using photon index=1.80, rate=0.0148, arf fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6.arf
[Thu Jul  5 00:40:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 00:40:18 2012] Updating source flux to 3.3e-13
[Thu Jul  5 00:41:32 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu Jul  5 00:44:05 2012] xmm0603510701/analysis//spectral/fullrun_pn_xmm0603510701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete