[Fri Aug 24 05:44:16 2012] Detection parameters:
  Position = (360.2, 503.5) = 8 36 38.39 -45 39 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.1 +/- 32.5
  Background counts = 289.3
  Rate = 0.006 +/- 0.0007

[Fri Aug 24 05:44:17 2012] Off-axis axis estimate = 15.52'
[Fri Aug 24 05:49:22 2012] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:49:22 2012] Initial guess for spatial extent in simple fitting = 14.19"
[Fri Aug 24 05:49:22 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.989
[Fri Aug 24 05:49:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 14.19"
[Fri Aug 24 06:17:58 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug 24 06:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5.csv
[Fri Aug 24 06:17:58 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug 24 06:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5.csv
[Fri Aug 24 06:17:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:17:59 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 24 06:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Aug 24 06:17:59 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 24 06:17:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Aug 24 06:17:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:44:45 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 17.595964 pixels away
[Fri Aug 24 06:44:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 06:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 06:44:45 2012] Assessing source extent using major
[Fri Aug 24 06:44:45 2012] Source does appear to be extended
[Fri Aug 24 06:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 06:44:56 2012] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 06:44:56 2012] Initial guess for spatial extent in simple fitting = 14.19"
[Fri Aug 24 06:44:56 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.989
[Fri Aug 24 06:44:56 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.19"
[Fri Aug 24 07:11:28 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 24 07:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5.csv
[Fri Aug 24 07:11:28 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 24 07:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5.csv
[Fri Aug 24 07:11:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 07:11:28 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 24 07:11:28 2012] fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 24 07:11:28 2012] Fit fullrun_pn_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 24 07:32:43 2012] Spatial fit model total counts = 4586.890000, observed total counts = 4278.000000
[Fri Aug 24 07:32:43 2012] Offset between fit and detection position for source 9 = 4.566945 pixels
[Fri Aug 24 07:32:43 2012] 4452.090000 total counts/ 2982.040000 bgd. counts: snr = 26.920020
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 4.566945 pixels
  Position = (364.0, 501.0) = 8 36 36.80 -45 40 10.6
  Extent = 28.4 (28.4-56.8)", rotation angle = 0
  Source counts = 1470.0 +/- 66.7
  Background counts = 2982.0
  Rate = 0.03 +/- 0.001
[Fri Aug 24 07:32:43 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 07:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 07:32:43 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 07:32:43 2012] Source does appear to be extended
[Fri Aug 24 07:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 07:32:54 2012] Counts = 1470.050000, rescaling region sizes by 2.000000
[Fri Aug 24 07:32:54 2012] XMMSAS src. selection expression = ellipse(31621.616000, 43538.740000, 3405.816098, 3405.816098, 0.000000, X, Y)
[Fri Aug 24 07:32:54 2012] Writing source region out to fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9_src.reg
[Fri Aug 24 07:32:54 2012] Extracting stamp from image fullrun_pn_xmm0603510601_pi300-10000_cl_sm2.00.img.gz, (168, 305) - (560, 595)
[Fri Aug 24 07:32:54 2012] XMMSAS bgd. selection expression = annulus(31621.616000, 43538.740000, 11352.720327, 22705.440653, X, Y) && !ellipse(37247.747925, 20060.283020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26142.872833, 30300.470825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14529.079071, 40691.145691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.257904, 32062.449158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.698000, 31634.517400, 238.748807, 238.748807, 0.000000, X, Y) && !ellipse(31000.118835, 31248.141052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21184.370651, 42515.538452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17277.860107, 41493.397308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30265.684631, 40871.661133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27395.826294, 38910.221069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30093.726349, 35935.929810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32197.377747, 35765.763672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35388.133545, 32349.651642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.201447, 31450.433044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.672577, 29440.849335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24295.346802, 29200.723175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26105.877655, 27966.705383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14803.883896, 26490.732117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20215.503860, 25143.420400, 313.688809, 313.688809, 0.000000, X, Y) && !ellipse(38023.093475, 24647.446167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14656.596146, 22912.018127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23689.540802, 22273.024261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24357.615204, 20395.678268, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 07:32:54 2012] Writing fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9.gif
[Fri Aug 24 07:45:21 2012] Mean detx,y = (9248.09, -12361.45) 
[Fri Aug 24 07:45:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 07:52:17 2012] grppha failed
[Fri Aug 24 07:52:18 2012] Setting source spectrum file to fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Aug 24 07:52:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Aug 24 08:17:48 2012] Updating aperture counts using extracted products
[Fri Aug 24 08:17:48 2012] Error reading totcts from fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Aug 24 08:17:48 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 08:17:51 2012] Source 9 has no response, skipping
[Fri Aug 24 08:17:52 2012] xmm0603510601/analysis//spectral/fullrun_pn_xmm0603510601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete