[Fri Aug 24 05:44:53 2012] Detection parameters:
  Position = (495.3, 326.7) = 8 35 42.00 -45 52 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 15.8
  Background counts = 58.6
  Rate = 0.001 +/- 0.0003

[Fri Aug 24 05:44:53 2012] Off-axis axis estimate = 14.42'
[Fri Aug 24 06:28:13 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 06:28:13 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Fri Aug 24 06:28:13 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.927
[Fri Aug 24 06:28:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.64"
[Fri Aug 24 06:44:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 24 06:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10.csv
[Fri Aug 24 06:44:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 24 06:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10.csv
[Fri Aug 24 06:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:44:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 24 06:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 24 06:44:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 24 06:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 24 06:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603510601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:44:49 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.777553 pixels away
[Fri Aug 24 06:44:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 06:44:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 06:44:49 2012] Assessing source extent using major
[Fri Aug 24 06:44:49 2012] Source does appear to be extended
[Fri Aug 24 06:44:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 07:21:10 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 07:21:10 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Fri Aug 24 07:21:10 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.927
[Fri Aug 24 07:21:10 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.64"
[Fri Aug 24 07:32:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10.ximg exists
[Fri Aug 24 07:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10.csv
[Fri Aug 24 07:32:38 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Aug 24 07:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10.csv
[Fri Aug 24 07:32:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 07:32:39 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 24 07:32:39 2012] fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 24 07:32:39 2012] Fit fullrun_mos2_xmm0603510601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Aug 24 07:32:47 2012] Spatial fit model total counts = 933.337000, observed total counts = 894.000000
[Fri Aug 24 07:32:47 2012] Offset between fit and detection position for source 8 = 0.796059 pixels
[Fri Aug 24 07:32:47 2012] 936.098600 total counts/ 886.680000 bgd. counts: snr = 1.659614
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.796059 pixels
  Position = (494.6, 326.4) = 8 35 42.31 -45 52 48.6
  Extent = 7.4 (5.1-11.6)", rotation angle = 0
  Source counts = 49.4 +/- 30.6
  Background counts = 886.7
  Rate = 0.001 +/- 0.0006
  Deleting source due to low Poisson probability