[Thu Dec 29 04:53:35 2011] Detection parameters:
  Position = (359.7, 232.4) = 21 39 25.47 -43 9 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 18.2
  Background counts = 117.9
  Rate = 0.002 +/- 0.0005

[Thu Dec 29 04:53:37 2011] Off-axis axis estimate = 6.53'
[Thu Dec 29 05:01:38 2011] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:01:38 2011] Initial guess for spatial extent in simple fitting = 9.69"
[Thu Dec 29 05:01:38 2011] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.806
[Thu Dec 29 05:01:38 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 9.69"
[Thu Dec 29 06:58:32 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30.ximg exists
[Thu Dec 29 06:58:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30.csv
[Thu Dec 29 06:58:32 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Dec 29 06:58:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30.csv
[Thu Dec 29 06:58:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 06:58:32 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Dec 29 06:58:32 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Dec 29 06:58:32 2011] Fit fullrun_pn_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Dec 29 09:43:00 2011] Source 31 is offset by 4.931300 and 6.458623 pixels which is larger than
2 X fitted extent = 1.847099 x 1.847099, not incorporating fit results
[Thu Dec 29 09:43:00 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 09:43:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 09:43:00 2011] Assessing source extent using major
[Thu Dec 29 09:43:00 2011] Source does appear to be extended
[Thu Dec 29 09:43:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 09:43:39 2011] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 09:43:39 2011] Initial guess for spatial extent in simple fitting = 9.69"
[Thu Dec 29 09:43:39 2011] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.806
[Thu Dec 29 09:43:39 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 9.69"
[Thu Dec 29 11:51:39 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30.ximg exists
[Thu Dec 29 11:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30.csv
[Thu Dec 29 11:51:39 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Dec 29 11:51:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30.csv
[Thu Dec 29 11:51:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 11:51:40 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Dec 29 11:51:40 2011] fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Dec 29 11:51:40 2011] Fit fullrun_pn_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Dec 29 15:05:32 2011] Spatial fit model total counts = 630.989000, observed total counts = 631.000000
[Thu Dec 29 15:05:32 2011] Offset between fit and detection position for source 31 = 0.666020 pixels
[Thu Dec 29 15:05:32 2011] 647.478300 total counts/ 557.329000 bgd. counts: snr = 3.818621
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.666020 pixels
  Position = (359.1, 232.5) = 21 39 25.73 -43 9 16.5
  Extent = 7.7 (5.9-9.4)", rotation angle = 0
  Source counts = 90.1 +/- 25.4
  Background counts = 557.3
  Rate = 0.003 +/- 0.0008
[Thu Dec 29 15:05:32 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 15:05:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 15:05:32 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 15:05:32 2011] Source does appear to be extended
[Thu Dec 29 15:05:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 15:06:19 2011] XMMSAS src. selection expression = ellipse(31191.376800, 20181.050000, 463.276213, 463.276213, 0.000000, X, Y)
[Thu Dec 29 15:06:19 2011] Writing source region out to fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31_src.reg
[Thu Dec 29 15:06:19 2011] Extracting stamp from image fullrun_pn_xmm0603501001_pi300-10000_cl_sm2.00.img.gz, (332, 206) - (386, 259)
[Thu Dec 29 15:06:19 2011] XMMSAS bgd. selection expression = annulus(31191.376800, 20181.050000, 772.127022, 1544.254044, X, Y) && !ellipse(30301.207600, 21409.755400, 437.698413, 437.698413, 0.000000, X, Y)
[Thu Dec 29 15:06:19 2011] Writing fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31.gif
[Thu Dec 29 16:02:54 2011] Mean detx,y = (-8544.51, -638.89) 
[Thu Dec 29 16:03:05 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 16:03:57 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 16:03:58 2011] Setting source spectrum file to fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Dec 29 16:03:58 2011] Setting bgd. spectrum file to fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Dec 29 18:08:17 2011] Not generating rmf since there are only 90 counts
[Thu Dec 29 18:08:17 2011] rmf not generated due to insufficient counts
[Thu Dec 29 20:38:37 2011] Updating aperture counts using extracted products
[Thu Dec 29 20:38:37 2011] Error reading totcts from fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Dec 29 20:38:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 20:38:40 2011] Using photon index=1.80, rate=0.00279, arf fullrun_pn_xmm0603501001_pi300-10000_pass1_cl_src31.arf
[Thu Dec 29 20:38:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 20:38:40 2011] Updating source flux to 1.3e-14
[Thu Dec 29 20:42:14 2011] Flag b found in src. 31 procflags, skipping spectral fitting
[Thu Dec 29 20:42:14 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting