[Thu Dec 29 04:55:21 2011] Detection parameters:
  Position = (345.1, 333.3) = 21 39 31.32 -43 1 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 18.7
  Background counts = 30.9
  Rate = 0.008 +/- 0.0007

[Thu Dec 29 04:55:23 2011] Off-axis axis estimate = 4.22'
[Thu Dec 29 08:09:43 2011] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 08:09:43 2011] Initial guess for spatial extent in simple fitting = 8.54"
[Thu Dec 29 08:09:43 2011] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Thu Dec 29 08:09:43 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 8.54"
[Thu Dec 29 09:42:46 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5.ximg exists
[Thu Dec 29 09:42:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5.csv
[Thu Dec 29 09:42:46 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Dec 29 09:42:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5.csv
[Thu Dec 29 09:42:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 09:42:46 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Dec 29 09:42:47 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Dec 29 09:42:47 2011] Fit fullrun_mos2_xmm0603501001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Dec 29 09:43:19 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.542614 pixels away
[Thu Dec 29 09:43:19 2011] Source 9 is offset by -2.372170 and 2.786643 pixels which is larger than
2 X fitted extent = 0.936869 x 0.936869, not incorporating fit results
[Thu Dec 29 09:43:19 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 09:43:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 09:43:19 2011] Assessing source extent using major
[Thu Dec 29 09:43:19 2011] Source does appear to be extended
[Thu Dec 29 09:43:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:18:58 2011] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 13:18:58 2011] Initial guess for spatial extent in simple fitting = 8.54"
[Thu Dec 29 13:18:58 2011] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Thu Dec 29 13:18:58 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 8.54"
[Thu Dec 29 15:05:15 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_src5.ximg exists
[Thu Dec 29 15:05:15 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Dec 29 15:05:15 2011] Fit fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Dec 29 15:05:15 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Dec 29 15:05:15 2011] fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Dec 29 15:05:15 2011] Fit fullrun_mos2_xmm0603501001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Dec 29 15:05:53 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.519722 pixels away
[Thu Dec 29 15:05:54 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 15:05:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 15:05:54 2011] Assessing source extent using major
[Thu Dec 29 15:05:54 2011] Source does appear to be extended
[Thu Dec 29 15:05:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 19:35:14 2011] XMMSAS src. selection expression = ellipse(29977.181183, 28946.997955, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 19:35:14 2011] Writing source region out to fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9_src.reg
[Thu Dec 29 19:35:14 2011] Extracting stamp from image fullrun_mos2_xmm0603501001_pi300-10000_cl_sm2.00.img.gz, (308, 296) - (383, 371)
[Thu Dec 29 19:35:14 2011] XMMSAS bgd. selection expression = annulus(29977.181183, 28946.997955, 1087.500000, 2175.000000, X, Y) && !ellipse(30085.509033, 26157.772858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29505.253400, 27939.105400, 363.208010, 363.208010, 0.000000, X, Y)
[Thu Dec 29 19:35:14 2011] Writing fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9.gif
[Thu Dec 29 19:38:24 2011] Mean detx,y = (3026.29, -6275.54) 
[Thu Dec 29 19:38:27 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 19:39:17 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 19:39:18 2011] Setting source spectrum file to fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Dec 29 19:39:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Dec 29 20:02:49 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 29 20:02:49 2011] rmf not generated due to insufficient counts
[Thu Dec 29 20:38:46 2011] Updating aperture counts using extracted products
[Thu Dec 29 20:38:47 2011] Error reading totcts from fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Dec 29 20:38:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 20:38:49 2011] Using photon index=1.80, rate=0.0078, arf fullrun_mos2_xmm0603501001_pi300-10000_pass1_cl_src9.arf
[Thu Dec 29 20:38:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 20:38:49 2011] Updating source flux to 1.2e-13
[Thu Dec 29 20:40:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting