[Fri Feb 24 19:03:28 2012] Detection parameters:
  Position = (310.5, 253.0) = 20 59 42.23 -42 47 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.7 +/- 21.0
  Background counts = 164.9
  Rate = 0.006 +/- 0.001

[Fri Feb 24 19:03:29 2012] Off-axis axis estimate = 3.41'
[Fri Feb 24 19:07:55 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:07:55 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Fri Feb 24 19:07:55 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Fri Feb 24 19:07:55 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.13"
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17.ximg exists
[Fri Feb 24 20:13:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17.csv
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Feb 24 20:13:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17.csv
[Fri Feb 24 20:13:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:13:21 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Feb 24 20:13:21 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Feb 24 20:13:21 2012] Fit fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Feb 24 20:50:08 2012] Source 18 is offset by 2.012910 and -3.845855 pixels which is larger than
2 X fitted extent = 1.736175 x 1.736175, not incorporating fit results
[Fri Feb 24 20:50:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:50:08 2012] Assessing source extent using major
[Fri Feb 24 20:50:08 2012] Source does appear to be extended
[Fri Feb 24 20:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 20:50:08 2012] Source is confused with source 19
[Fri Feb 24 20:50:27 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 20:50:27 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Fri Feb 24 20:50:27 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Fri Feb 24 20:50:27 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.13"
[Fri Feb 24 21:53:11 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16.ximg exists
[Fri Feb 24 21:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16.csv
[Fri Feb 24 21:53:11 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Feb 24 21:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16.csv
[Fri Feb 24 21:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 21:53:12 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Feb 24 21:53:12 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Feb 24 21:53:12 2012] Fit fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Feb 24 22:32:49 2012] Warning, spatial fit 16 centroid is now closest to src. 19
[Fri Feb 24 22:32:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 22:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 22:32:49 2012] Assessing source extent using major
[Fri Feb 24 22:32:49 2012] Source does appear to be extended
[Fri Feb 24 22:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:33:06 2012] XMMSAS src. selection expression = ellipse(26966.563812, 21966.458649, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 22:33:06 2012] Writing source region out to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18_src.reg
[Fri Feb 24 22:33:06 2012] Extracting stamp from image fullrun_pn_xmm0603500901_pi300-10000_cl_sm2.00.img.gz, (273, 216) - (348, 291)
[Fri Feb 24 22:33:06 2012] XMMSAS bgd. selection expression = annulus(26966.563812, 21966.458649, 1087.500000, 2175.000000, X, Y) && !ellipse(24130.164920, 24864.163600, 955.680027, 955.680027, 0.000000, X, Y) && !ellipse(26196.655762, 21865.227692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26289.600800, 21344.621800, 1329.728038, 657.884019, 126.222000, X, Y) && !ellipse(28592.676940, 20817.631660, 560.628816, 560.628816, 0.000000, X, Y) && !ellipse(24925.077271, 19122.565170, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 22:33:06 2012] Writing fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18.gif
[Fri Feb 24 22:46:55 2012] Mean detx,y = (-3717.31, -1708.54) 
[Fri Feb 24 22:47:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:48:06 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:48:07 2012] Setting source spectrum file to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 24 22:48:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Feb 24 23:17:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 24 23:17:20 2012] rmf not generated due to insufficient counts
[Sat Feb 25 00:15:06 2012] Updating aperture counts using extracted products
[Sat Feb 25 00:15:07 2012] Error reading totcts from fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Feb 25 00:15:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 00:15:08 2012] Using photon index=1.80, rate=0.00598, arf fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src18.arf
[Sat Feb 25 00:15:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 00:15:08 2012] Updating source flux to 2.1e-14
[Sat Feb 25 00:16:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting