[Fri Feb 24 19:03:27 2012] Detection parameters:
  Position = (303.7, 294.3) = 20 59 44.92 -42 44 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2244.1 +/- 59.9
  Background counts = 163.5
  Rate = 0.1 +/- 0.003

[Fri Feb 24 19:03:29 2012] Off-axis axis estimate = 0.49'
[Fri Feb 24 19:07:55 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:07:55 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Fri Feb 24 19:07:55 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Fri Feb 24 19:07:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.67"
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 24 20:13:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 24 20:13:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1.csv
[Fri Feb 24 20:13:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 20:13:20 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 20:13:20 2012] Fit fullrun_pn_xmm0603500901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 20:50:08 2012] Spatial fit model total counts = 994.967000, observed total counts = 995.000000
[Fri Feb 24 20:50:08 2012] Offset between fit and detection position for source 1 = 0.237111 pixels
[Fri Feb 24 20:50:08 2012] 991.727000 total counts/ 372.617000 bgd. counts: snr = 32.072771
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237111 pixels
  Position = (303.7, 294.5) = 20 59 44.94 -42 44 58.1
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 619.1 +/- 31.5
  Background counts = 372.6
  Rate = 0.1 +/- 0.005
[Fri Feb 24 20:50:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:50:08 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 20:50:08 2012] Source does appear to be extended
[Fri Feb 24 20:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 20:50:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 20:50:27 2012] Initial guess for spatial extent in simple fitting = 6.28"
[Fri Feb 24 20:50:27 2012] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.794
[Fri Feb 24 20:50:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.28"
[Fri Feb 24 21:53:11 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 24 21:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 21:53:11 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 24 21:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 21:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 21:53:12 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 21:53:12 2012] fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 21:53:12 2012] Fit fullrun_pn_xmm0603500901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 22:32:49 2012] Spatial fit model total counts = 994.957000, observed total counts = 995.000000
[Fri Feb 24 22:32:49 2012] Offset between fit and detection position for source 1 = 0.000132 pixels
[Fri Feb 24 22:32:49 2012] 991.714000 total counts/ 372.460000 bgd. counts: snr = 32.086992
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000132 pixels
  Position = (303.7, 294.5) = 20 59 44.94 -42 44 58.1
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 619.3 +/- 31.5
  Background counts = 372.5
  Rate = 0.1 +/- 0.005
[Fri Feb 24 22:32:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 22:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 22:32:49 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 22:32:49 2012] Source does appear to be extended
[Fri Feb 24 22:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:33:06 2012] XMMSAS src. selection expression = ellipse(26371.932400, 25575.955200, 376.874411, 376.874411, 0.000000, X, Y)
[Fri Feb 24 22:33:06 2012] Writing source region out to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 24 22:33:06 2012] Extracting stamp from image fullrun_pn_xmm0603500901_pi300-10000_cl_sm2.00.img.gz, (282, 273) - (325, 316)
[Fri Feb 24 22:33:06 2012] XMMSAS bgd. selection expression = annulus(26371.932400, 25575.955200, 628.124018, 1256.248036, X, Y)
[Fri Feb 24 22:33:06 2012] Writing fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1.gif
[Fri Feb 24 22:33:15 2012] Mean detx,y = (-1616.67, 1366.00) 
[Fri Feb 24 22:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 22:33:46 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 22:33:47 2012] Setting source spectrum file to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 22:33:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Feb 25 00:15:06 2012] Updating aperture counts using extracted products
[Sat Feb 25 00:15:06 2012] Error reading totcts from fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Feb 25 00:15:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 00:15:07 2012] Using photon index=1.80, rate=0.0997, arf fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1.arf
[Sat Feb 25 00:15:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 00:15:07 2012] Updating source flux to 3.4e-13
[Sat Feb 25 00:18:42 2012] Reading fit data from xmm0603500901/analysis//spectral/fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_pl.csv
[Sat Feb 25 00:18:42 2012] Spectral fit parameter nH value = 1.26094e+12
[Sat Feb 25 00:18:42 2012] Spectral fit parameter PhoIndex value = 1.80114
[Sat Feb 25 00:18:42 2012] Failed to get F(0.3-8.0) from xmm0603500901/analysis//spectral/fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Feb 25 00:18:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 00:18:42 2012] Using Nh = 1.3e+12, photon index=1.80, rate=0.0997, arf fullrun_pn_xmm0603500901_pi300-10000_pass1_cl_src1.arf
[Sat Feb 25 00:18:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 00:18:42 2012] Updating source flux to 3.4e-13