[Sat Dec 24 06:31:16 2011] Detection parameters:
  Position = (245.2, 478.7) = 16 42 53.83 39 50 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 9.8
  Background counts = 25.3
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 06:31:16 2011] Off-axis axis estimate = 13.62'
[Sat Dec 24 08:34:16 2011] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 08:34:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 08:34:16 2011] Initial guess for spatial extent in simple fitting = 13.24"
[Sat Dec 24 08:34:16 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sat Dec 24 08:34:16 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 13.24"
[Sat Dec 24 09:07:42 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16.ximg exists
[Sat Dec 24 09:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16.csv
[Sat Dec 24 09:07:42 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Dec 24 09:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16.csv
[Sat Dec 24 09:07:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 09:07:42 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Dec 24 09:07:42 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Dec 24 09:07:42 2011] Fit fullrun_mos2_xmm0603500701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Dec 24 09:08:04 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.643766 pixels away
[Sat Dec 24 09:08:04 2011] Spatial fit model total counts = 109.985000, observed total counts = 118.000000
[Sat Dec 24 09:08:04 2011] Offset between fit and detection position for source 16 = 0.026696 pixels
[Sat Dec 24 09:08:04 2011] 102.353900 total counts/ 55.887500 bgd. counts: snr = 6.215580
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.026696 pixels
  Position = (245.2, 478.6) = 16 42 53.83 39 50 19.3
  Extent = 7.5 (5.6-9.8)", rotation angle = 0
  Source counts = 46.5 +/- 10.1
  Background counts = 55.9
  Rate = 0.003 +/- 0.0005
[Sat Dec 24 09:08:04 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:08:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:08:04 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:08:04 2011] Source does appear to be extended
[Sat Dec 24 09:08:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 11:04:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 11:04:02 2011] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Dec 24 11:04:02 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Sat Dec 24 11:04:02 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 7.45"
[Sat Dec 24 11:41:44 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16.ximg exists
[Sat Dec 24 11:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16.csv
[Sat Dec 24 11:41:44 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Dec 24 11:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16.csv
[Sat Dec 24 11:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 11:41:44 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Dec 24 11:41:44 2011] fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Dec 24 11:41:44 2011] Fit fullrun_mos2_xmm0603500701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Dec 24 11:42:04 2011] Spatial fit model total counts = 97.455400, observed total counts = 102.000000
[Sat Dec 24 11:42:04 2011] Offset between fit and detection position for source 16 = 0.020934 pixels
[Sat Dec 24 11:42:04 2011] 90.882900 total counts/ 45.940700 bgd. counts: snr = 6.630641
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.020934 pixels
  Position = (245.2, 478.6) = 16 42 53.82 39 50 19.3
  Extent = 7.3 (5.6-9.1)", rotation angle = 0
  Source counts = 44.9 +/- 9.5
  Background counts = 45.9
  Rate = 0.002 +/- 0.0005
[Sat Dec 24 11:42:04 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 11:42:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 11:42:04 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 11:42:04 2011] Source does appear to be extended
[Sat Dec 24 11:42:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 13:49:28 2011] XMMSAS src. selection expression = ellipse(21287.366200, 41590.884000, 436.492994, 436.492994, 0.000000, X, Y)
[Sat Dec 24 13:49:28 2011] Writing source region out to fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16_src.reg
[Sat Dec 24 13:49:28 2011] Extracting stamp from image fullrun_mos2_xmm0603500701_pi300-10000_cl_sm2.00.img.gz, (220, 454) - (270, 504)
[Sat Dec 24 13:49:28 2011] XMMSAS bgd. selection expression = annulus(21287.366200, 41590.884000, 727.488323, 1454.976646, X, Y) && !ellipse(20193.761963, 39528.988922, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 13:49:28 2011] Writing fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16.gif
[Sat Dec 24 13:58:33 2011] Mean detx,y = (-3800.17, -17144.81) 
[Sat Dec 24 13:58:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 13:59:00 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 13:59:01 2011] Setting source spectrum file to fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 24 13:59:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Dec 24 14:10:14 2011] Not generating rmf since there are only 44 counts
[Sat Dec 24 14:10:14 2011] rmf not generated due to insufficient counts
[Sat Dec 24 14:11:15 2011] Updating aperture counts using extracted products
[Sat Dec 24 14:11:15 2011] Error reading totcts from fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 24 14:11:15 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 14:11:15 2011] Using photon index=1.80, rate=0.00243, arf fullrun_mos2_xmm0603500701_pi300-10000_pass1_cl_src16.arf
[Sat Dec 24 14:11:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 14:11:15 2011] Updating source flux to 9.6e-14
[Sat Dec 24 14:11:47 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting