[Mon Nov 28 11:17:55 2011] Detection parameters:
  Position = (451.3, 174.1) = 3 50 50.55 -36 59 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.9 +/- 13.7
  Background counts = 18.3
  Rate = 0.003 +/- 0.0004

[Mon Nov 28 11:17:56 2011] Off-axis axis estimate = 14.28'
[Mon Nov 28 13:26:28 2011] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:26:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 13:26:28 2011] Initial guess for spatial extent in simple fitting = 13.57"
[Mon Nov 28 13:26:28 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.935
[Mon Nov 28 13:26:28 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 13.57"
[Mon Nov 28 14:33:08 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14.ximg exists
[Mon Nov 28 14:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14.csv
[Mon Nov 28 14:33:08 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Nov 28 14:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14.csv
[Mon Nov 28 14:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 14:33:09 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Nov 28 14:33:09 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Nov 28 14:33:09 2011] Fit fullrun_mos1_xmm0603500201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Nov 28 16:01:06 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.161037 pixels away
[Mon Nov 28 16:01:06 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 16:01:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 16:01:06 2011] Assessing source extent using major
[Mon Nov 28 16:01:06 2011] Source does appear to be extended
[Mon Nov 28 16:01:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:32:00 2011] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:32:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 17:32:00 2011] Initial guess for spatial extent in simple fitting = 13.57"
[Mon Nov 28 17:32:00 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.935
[Mon Nov 28 17:32:00 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 13.57"
[Mon Nov 28 18:28:28 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14.ximg exists
[Mon Nov 28 18:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14.csv
[Mon Nov 28 18:28:28 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Nov 28 18:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14.csv
[Mon Nov 28 18:28:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 18:28:28 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Nov 28 18:28:28 2011] fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Nov 28 18:28:28 2011] Fit fullrun_mos1_xmm0603500201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Nov 28 20:10:17 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.700320 pixels away
[Mon Nov 28 20:10:17 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 20:10:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 20:10:17 2011] Assessing source extent using major
[Mon Nov 28 20:10:17 2011] Source does appear to be extended
[Mon Nov 28 20:10:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 21:58:25 2011] XMMSAS src. selection expression = ellipse(39215.812286, 15101.285675, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 21:58:25 2011] Writing source region out to fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4_src.reg
[Mon Nov 28 21:58:25 2011] Extracting stamp from image fullrun_mos1_xmm0603500201_pi300-10000_cl_sm2.00.img.gz, (414, 137) - (489, 212)
[Mon Nov 28 21:58:25 2011] XMMSAS bgd. selection expression = annulus(39215.812286, 15101.285675, 1087.500000, 2175.000000, X, Y) && !ellipse(37389.414000, 17801.032600, 1953.449526, 1953.449526, 0.000000, X, Y)
[Mon Nov 28 21:58:25 2011] Writing fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4.gif
[Mon Nov 28 22:05:08 2011] Mean detx,y = (-391.71, 15698.00) 
[Mon Nov 28 22:05:10 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 22:05:50 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 22:05:50 2011] Setting source spectrum file to fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov 28 22:05:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Nov 28 22:42:45 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 22:42:45 2011] rmf not generated due to insufficient counts
[Mon Nov 28 23:31:27 2011] Updating aperture counts using extracted products
[Mon Nov 28 23:31:27 2011] Error reading totcts from fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov 28 23:31:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 23:31:28 2011] Using photon index=1.80, rate=0.00271, arf fullrun_mos1_xmm0603500201_pi300-10000_pass1_cl_src4.arf
[Mon Nov 28 23:31:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 23:31:29 2011] Updating source flux to 6e-14
[Mon Nov 28 23:31:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting