[Mon Nov 28 11:12:05 2011] Detection parameters:
  Position = (308.1, 286.1) = 4 37 21.23 -47 15 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 23.2
  Background counts = 149.9
  Rate = 0.0009 +/- 0.0002

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 1.14'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Nov 30 17:24:41 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 7.00"
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51.csv
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51.csv
[Wed Nov 30 19:28:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Nov 30 19:28:46 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Nov 30 19:29:12 2011] Spatial fit model total counts = 1217.170000, observed total counts = 1215.000000
[Wed Nov 30 19:29:12 2011] Offset between fit and detection position for source 39 = 6.107049 pixels
[Wed Nov 30 19:29:12 2011] 1224.644000 total counts/ 855.637000 bgd. counts: snr = 12.615075
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 6.107049 pixels
  Position = (314.0, 287.8) = 4 37 18.72 -47 15 19.3
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 369.0 +/- 35.0
  Background counts = 855.6
  Rate = 0.003 +/- 0.0003
[Wed Nov 30 19:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:29:12 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:29:12 2011] Source does appear to be extended
[Wed Nov 30 19:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:12 2011] Source is confused with source 2
[Wed Nov 30 20:56:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 20:56:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 20:56:57 2011] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Nov 30 20:56:57 2011] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.140
[Wed Nov 30 20:56:57 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 13.99"
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src45.ximg exists
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Dec  1 00:43:43 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src45 appears to have run properly
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Dec  1 00:43:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Dec  1 00:43:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Thu Dec  1 00:43:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 00:44:10 2011] Source 39 is offset by -6.947310 and -1.250743 pixels which is larger than
2 X fitted extent = 2.292524 x 2.292524, not incorporating fit results
[Thu Dec  1 00:44:10 2011] Warning, spatial fit 45 centroid is now closest to src. 40
[Thu Dec  1 00:44:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:44:10 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:44:10 2011] Source does appear to be extended
[Thu Dec  1 00:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 02:11:53 2011] XMMSAS src. selection expression = ellipse(27269.686000, 24990.083400, 839.568024, 839.568024, 0.000000, X, Y)
[Thu Dec  1 02:11:53 2011] Writing source region out to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39_src.reg
[Thu Dec  1 02:11:53 2011] Extracting stamp from image fullrun_mos2_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (266, 240) - (362, 336)
[Thu Dec  1 02:11:53 2011] XMMSAS bgd. selection expression = annulus(27269.686000, 24990.083400, 1399.280040, 2798.560081, X, Y) && !ellipse(27853.895800, 25137.614000, 1327.584038, 1327.584038, 0.000000, X, Y) && !ellipse(24222.912000, 28280.138000, 1111.496032, 225.881606, 132.402000, X, Y) && !ellipse(24144.108368, 25554.388245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.031891, 26473.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.416138, 28656.914764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.280480, 27688.320060, 253.413607, 253.413607, 0.000000, X, Y) && !ellipse(28492.350739, 24432.062225, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 02:11:53 2011] Writing fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39.gif
[Thu Dec  1 02:37:36 2011] Mean detx,y = (-22.92, -16.81) 
[Thu Dec  1 02:37:37 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 02:37:46 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 02:37:47 2011] Setting source spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Dec  1 02:37:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Dec  1 03:55:25 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:25 2011] Error reading totcts from fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Dec  1 03:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:27 2011] Using photon index=1.80, rate=0.00309, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src39.arf
[Thu Dec  1 03:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:27 2011] Updating source flux to 3e-14
[Thu Dec  1 03:59:12 2011] Flag b found in src. 39 procflags, skipping spectral fitting
[Thu Dec  1 03:59:12 2011] Flag c found in src. 39 procflags, skipping spectral fitting