[Mon Nov 28 11:12:02 2011] Detection parameters:
  Position = (292.3, 340.0) = 4 37 27.98 -47 11 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154644.6 +/- 469.9
  Background counts = 156.8
  Rate = 1 +/- 0.004

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 3.05'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 7.95"
[Wed Nov 30 17:24:41 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.95"
[Wed Nov 30 19:28:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 19:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 19:28:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 19:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 19:28:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 19:28:45 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 19:29:12 2011] Spatial fit model total counts = 128749.000000, observed total counts = 129833.000000
[Wed Nov 30 19:29:12 2011] Offset between fit and detection position for source 3 = 0.204347 pixels
[Wed Nov 30 19:29:12 2011] 128565.000000 total counts/ 25600.000000 bgd. counts: snr = 643.531250
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.204347 pixels
  Position = (292.1, 340.0) = 4 37 28.07 -47 11 32.1
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 102965.0 +/- 358.6
  Background counts = 25600.0
  Rate = 0.9 +/- 0.003
[Wed Nov 30 19:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:29:12 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:29:12 2011] Source does appear to be extended
[Wed Nov 30 19:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 20:56:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 20:56:57 2011] Initial guess for spatial extent in simple fitting = 5.70"
[Wed Nov 30 20:56:57 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.220
[Wed Nov 30 20:56:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.70"
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 00:43:43 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 00:43:44 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 00:44:10 2011] Spatial fit model total counts = 128715.000000, observed total counts = 129833.000000
[Thu Dec  1 00:44:10 2011] Offset between fit and detection position for source 3 = 0.000992 pixels
[Thu Dec  1 00:44:10 2011] 128534.000000 total counts/ 25600.000000 bgd. counts: snr = 643.337500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000992 pixels
  Position = (292.1, 340.0) = 4 37 28.07 -47 11 32.1
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 102934.0 +/- 358.5
  Background counts = 25600.0
  Rate = 0.9 +/- 0.003
[Thu Dec  1 00:44:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:44:10 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:44:10 2011] Source does appear to be extended
[Thu Dec  1 00:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 02:11:52 2011] Counts = 102934.000000, rescaling region sizes by 3.000000
[Thu Dec  1 02:11:52 2011] XMMSAS src. selection expression = ellipse(25366.016520, 29534.200200, 1026.865073, 1026.865073, 0.000000, X, Y)
[Thu Dec  1 02:11:52 2011] Writing source region out to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec  1 02:11:52 2011] Extracting stamp from image fullrun_mos2_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (233, 281) - (351, 399)
[Thu Dec  1 02:11:52 2011] XMMSAS bgd. selection expression = annulus(25366.016520, 29534.200200, 5134.325365, 10268.650730, X, Y) && !ellipse(27853.895800, 25137.614000, 1327.584038, 1327.584038, 0.000000, X, Y) && !ellipse(17086.324000, 30646.590000, 300.146409, 300.146409, 0.000000, X, Y) && !ellipse(23939.966400, 23343.893040, 344.832810, 344.832810, 0.000000, X, Y) && !ellipse(16885.612800, 29879.845400, 409.284812, 409.284812, 0.000000, X, Y) && !ellipse(25383.397000, 28180.210600, 188.795205, 188.795205, 0.000000, X, Y) && !ellipse(16634.768800, 23035.589600, 366.112011, 366.112011, 0.000000, X, Y) && !ellipse(26565.040020, 34602.202400, 740.967221, 424.581612, 345.424202, X, Y) && !ellipse(24222.912000, 28280.138000, 1111.496032, 225.881606, 132.402000, X, Y) && !ellipse(17688.822800, 30034.325378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31034.120200, 27455.871800, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(33115.095900, 21285.958400, 358.960010, 358.960010, 0.000000, X, Y) && !ellipse(14845.095900, 29202.958400, 358.960010, 358.960010, 0.000000, X, Y) && !ellipse(24144.108368, 25554.388245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.031891, 26473.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34282.515625, 23922.729370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.416138, 28656.914764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.280480, 27688.320060, 253.413607, 253.413607, 0.000000, X, Y) && !ellipse(29037.477200, 34998.617400, 489.830671, 489.830671, 0.000000, X, Y) && !ellipse(20024.293000, 24245.096200, 420.936012, 420.936012, 0.000000, X, Y) && !ellipse(16189.790604, 21285.823303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28492.350739, 24432.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.912292, 23027.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19494.725937, 18590.432251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31384.022797, 31505.195679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.686000, 24990.083400, 1119.424032, 1119.424032, 0.000000, X, Y) && !ellipse(31197.060944, 33294.613739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18533.797821, 37506.464600, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 02:11:52 2011] Writing fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3.gif
[Thu Dec  1 02:12:17 2011] Mean detx,y = (4824.84, -1288.37) 
[Thu Dec  1 02:12:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 02:16:09 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 02:16:10 2011] Setting source spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec  1 02:16:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec  1 03:55:22 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:22 2011] Error reading totcts from fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec  1 03:55:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:25 2011] Using photon index=1.80, rate=0.861, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3.arf
[Thu Dec  1 03:55:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:25 2011] Updating source flux to 9.9e-12
[Thu Dec  1 04:01:55 2011] Reading fit data from xmm0603460101/analysis//spectral/fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_pl.csv
[Thu Dec  1 04:01:55 2011] Spectral fit parameter nH value = 2.09996e+14
[Thu Dec  1 04:01:55 2011] Spectral fit parameter PhoIndex value = 2.26512
[Thu Dec  1 04:01:55 2011] Failed to get F(0.3-8.0) from xmm0603460101/analysis//spectral/fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Dec  1 04:01:55 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 04:01:55 2011] Using Nh = 2.1e+14, photon index=2.27, rate=0.861, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src3.arf
[Thu Dec  1 04:01:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 04:01:55 2011] Updating source flux to 8.2e-12