[Mon Nov 28 11:12:05 2011] Detection parameters:
  Position = (203.9, 345.8) = 4 38 5.72 -47 11 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.0 +/- 21.5
  Background counts = 107.8
  Rate = 0.003 +/- 0.0003

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 7.67'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 10.26"
[Wed Nov 30 17:24:41 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.101
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 10.26"
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14.csv
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14.csv
[Wed Nov 30 19:28:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Nov 30 19:28:46 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Nov 30 19:29:12 2011] Source 29 is offset by -8.556795 and 0.711089 pixels which is larger than
2 X fitted extent = 8.169196 x 8.169196, not incorporating fit results
[Wed Nov 30 19:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:29:12 2011] Assessing source extent using major
[Wed Nov 30 19:29:12 2011] Source does appear to be extended
[Wed Nov 30 19:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 20:56:57 2011] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 20:56:57 2011] Initial guess for spatial extent in simple fitting = 10.26"
[Wed Nov 30 20:56:57 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.101
[Wed Nov 30 20:56:57 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 10.26"
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14.csv
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14.csv
[Thu Dec  1 00:43:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Dec  1 00:43:44 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Dec  1 00:44:10 2011] Warning, spatial fit 14 centroid is now closest to src. 7
[Thu Dec  1 00:44:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:44:10 2011] Assessing source extent using major
[Thu Dec  1 00:44:10 2011] Source does appear to be extended
[Thu Dec  1 00:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 02:11:52 2011] XMMSAS src. selection expression = ellipse(17688.822800, 30034.325378, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 02:11:52 2011] Writing source region out to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29_src.reg
[Thu Dec  1 02:11:52 2011] Extracting stamp from image fullrun_mos2_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (166, 308) - (241, 383)
[Thu Dec  1 02:11:52 2011] XMMSAS bgd. selection expression = annulus(17688.822800, 30034.325378, 1087.500000, 2175.000000, X, Y) && !ellipse(17086.324000, 30646.590000, 300.146409, 300.146409, 0.000000, X, Y) && !ellipse(16885.612800, 29879.845400, 409.284812, 409.284812, 0.000000, X, Y)
[Thu Dec  1 02:11:52 2011] Writing fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29.gif
[Thu Dec  1 02:26:48 2011] Mean detx,y = (7220.82, -8706.88) 
[Thu Dec  1 02:26:50 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 02:27:08 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 02:27:08 2011] Setting source spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Dec  1 02:27:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Dec  1 03:20:55 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 03:20:55 2011] rmf not generated due to insufficient counts
[Thu Dec  1 03:55:23 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:23 2011] Error reading totcts from fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Dec  1 03:55:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:26 2011] Using photon index=1.80, rate=0.00256, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src29.arf
[Thu Dec  1 03:55:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:26 2011] Updating source flux to 4.7e-14
[Thu Dec  1 03:59:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting