[Mon Nov 28 11:12:05 2011] Detection parameters:
  Position = (364.1, 357.2) = 4 36 57.37 -47 10 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.7 +/- 20.5
  Background counts = 125.3
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 6.39'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 9.62"
[Wed Nov 30 17:24:41 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.224
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 9.62"
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49.csv
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49.csv
[Wed Nov 30 19:28:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Nov 30 19:28:46 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Wed Nov 30 19:29:12 2011] Spatial fit model total counts = 716.653000, observed total counts = 718.000000
[Wed Nov 30 19:29:12 2011] Offset between fit and detection position for source 28 = 1.688677 pixels
[Wed Nov 30 19:29:12 2011] Warning, changing simple spatial fit ID from 49 to 48
[Wed Nov 30 19:29:12 2011] 691.824300 total counts/ 671.183000 bgd. counts: snr = 0.796740
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.688677 pixels
  Position = (362.6, 358.0) = 4 36 58.01 -47 10 13.8
  Extent = 4.5 (2.4-10.6)", rotation angle = 0
  Source counts = 20.6 +/- 26.3
  Background counts = 671.2
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability