[Mon Nov 28 11:12:04 2011] Detection parameters:
  Position = (361.3, 362.7) = 4 36 58.56 -47 9 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.8 +/- 19.4
  Background counts = 123.0
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 6.52'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 9.69"
[Wed Nov 30 17:24:41 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.841
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 9.69"
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48.csv
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Nov 30 19:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48.csv
[Wed Nov 30 19:28:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Nov 30 19:28:46 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Nov 30 19:28:46 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed Nov 30 19:29:12 2011] Warning, spatial fit 48 centroid is now closest to src. 28
[Wed Nov 30 19:29:12 2011] Source 26 is offset by 6.141136 and -4.161613 pixels which is larger than
2 X fitted extent = 1.105972 x 1.105972, not incorporating fit results
[Wed Nov 30 19:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:29:12 2011] Assessing source extent using major
[Wed Nov 30 19:29:12 2011] Source does appear to be extended
[Wed Nov 30 19:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 20:56:57 2011] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 20:56:57 2011] Initial guess for spatial extent in simple fitting = 9.69"
[Wed Nov 30 20:56:57 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.841
[Wed Nov 30 20:56:57 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 9.69"
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43.csv
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43.csv
[Thu Dec  1 00:43:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Dec  1 00:43:44 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu Dec  1 00:44:10 2011] Source 26 is offset by -1.344862 and 4.274824 pixels which is larger than
2 X fitted extent = 1.123347 x 1.123347, not incorporating fit results
[Thu Dec  1 00:44:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:44:10 2011] Assessing source extent using major
[Thu Dec  1 00:44:10 2011] Source does appear to be extended
[Thu Dec  1 00:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 02:11:53 2011] XMMSAS src. selection expression = ellipse(31384.022797, 31505.195679, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 02:11:53 2011] Writing source region out to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26_src.reg
[Thu Dec  1 02:11:53 2011] Extracting stamp from image fullrun_mos2_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (324, 325) - (399, 400)
[Thu Dec  1 02:11:53 2011] XMMSAS bgd. selection expression = annulus(31384.022797, 31505.195679, 1087.500000, 2175.000000, X, Y) && !ellipse(31197.060944, 33294.613739, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 02:11:53 2011] Writing fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26.gif
[Thu Dec  1 02:36:37 2011] Mean detx,y = (5255.17, 5013.65) 
[Thu Dec  1 02:36:39 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 02:37:00 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 02:37:00 2011] Setting source spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Dec  1 02:37:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Dec  1 03:44:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 03:44:57 2011] rmf not generated due to insufficient counts
[Thu Dec  1 03:55:24 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:25 2011] Error reading totcts from fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Dec  1 03:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:27 2011] Using photon index=1.80, rate=0.00122, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src26.arf
[Thu Dec  1 03:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:27 2011] Updating source flux to 1.9e-14
[Thu Dec  1 03:59:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting