[Mon Nov 28 11:12:02 2011] Detection parameters:
  Position = (320.8, 289.7) = 4 37 15.82 -47 15 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19366.7 +/- 165.7
  Background counts = 149.9
  Rate = 0.2 +/- 0.001

[Mon Nov 28 11:12:07 2011] Off-axis axis estimate = 1.74'
[Wed Nov 30 17:24:41 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:24:41 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Nov 30 17:24:41 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Wed Nov 30 17:24:41 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.30"
[Wed Nov 30 19:28:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Nov 30 19:28:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Nov 30 19:28:44 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Nov 30 19:28:45 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Nov 30 19:28:45 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Nov 30 19:29:12 2011] Spatial fit model total counts = 16378.000000, observed total counts = 16407.000000
[Wed Nov 30 19:29:12 2011] Offset between fit and detection position for source 2 = 0.217976 pixels
[Wed Nov 30 19:29:12 2011] 16485.450000 total counts/ 3621.050000 bgd. counts: snr = 213.782561
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.217976 pixels
  Position = (320.7, 289.5) = 4 37 15.85 -47 15 11.9
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 12864.4 +/- 128.4
  Background counts = 3621.1
  Rate = 0.1 +/- 0.001
[Wed Nov 30 19:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:29:12 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:29:12 2011] Source does appear to be extended
[Wed Nov 30 19:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:12 2011] Source is confused with source 39
[Wed Nov 30 20:56:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 20:56:57 2011] Initial guess for spatial extent in simple fitting = 5.53"
[Wed Nov 30 20:56:57 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.716
[Wed Nov 30 20:56:57 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 5.53"
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2.csv
[Thu Dec  1 00:43:43 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec  1 00:43:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2.csv
[Thu Dec  1 00:43:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec  1 00:43:44 2011] fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec  1 00:43:44 2011] Fit fullrun_mos2_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Dec  1 00:44:10 2011] Spatial fit model total counts = 16407.500000, observed total counts = 16407.000000
[Thu Dec  1 00:44:10 2011] Offset between fit and detection position for source 2 = 0.000203 pixels
[Thu Dec  1 00:44:10 2011] 16515.490000 total counts/ 3627.990000 bgd. counts: snr = 213.961502
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000203 pixels
  Position = (320.7, 289.5) = 4 37 15.85 -47 15 11.9
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 12887.5 +/- 128.5
  Background counts = 3628.0
  Rate = 0.1 +/- 0.001
[Thu Dec  1 00:44:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:44:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:44:10 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:44:10 2011] Source does appear to be extended
[Thu Dec  1 00:44:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 02:11:52 2011] Counts = 12887.500000, rescaling region sizes by 3.000000
[Thu Dec  1 02:11:52 2011] XMMSAS src. selection expression = ellipse(27853.895800, 25137.614000, 995.688029, 995.688029, 0.000000, X, Y)
[Thu Dec  1 02:11:52 2011] Writing source region out to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec  1 02:11:52 2011] Extracting stamp from image fullrun_mos2_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (263, 232) - (378, 347)
[Thu Dec  1 02:11:52 2011] XMMSAS bgd. selection expression = annulus(27853.895800, 25137.614000, 4978.440143, 9956.880287, X, Y) && !ellipse(25366.016520, 29534.200200, 1369.153431, 1369.153431, 0.000000, X, Y) && !ellipse(23939.966400, 23343.893040, 344.832810, 344.832810, 0.000000, X, Y) && !ellipse(25383.397000, 28180.210600, 188.795205, 188.795205, 0.000000, X, Y) && !ellipse(26565.040020, 34602.202400, 740.967221, 424.581612, 345.424202, X, Y) && !ellipse(24222.912000, 28280.138000, 1111.496032, 225.881606, 132.402000, X, Y) && !ellipse(26726.631470, 16333.336090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22628.171600, 18236.353561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17688.822800, 30034.325378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31034.120200, 27455.871800, 366.311211, 366.311211, 0.000000, X, Y) && !ellipse(20776.077591, 15610.153900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33115.095900, 21285.958400, 358.960010, 358.960010, 0.000000, X, Y) && !ellipse(37950.518250, 22139.489563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36547.932648, 20772.271606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.030273, 32765.421265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24144.108368, 25554.388245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.031891, 26473.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.698853, 18148.823883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34282.515625, 23922.729370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36499.287201, 15338.560333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.416138, 28656.914764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.280480, 27688.320060, 253.413607, 253.413607, 0.000000, X, Y) && !ellipse(29037.477200, 34998.617400, 489.830671, 489.830671, 0.000000, X, Y) && !ellipse(20024.293000, 24245.096200, 420.936012, 420.936012, 0.000000, X, Y) && !ellipse(36551.126648, 21983.957947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28492.350739, 24432.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.912292, 23027.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19494.725937, 18590.432251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36827.209869, 25117.606720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20680.462021, 17876.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31384.022797, 31505.195679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.686000, 24990.083400, 1119.424032, 1119.424032, 0.000000, X, Y) && !ellipse(31197.060944, 33294.613739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37911.161750, 20095.480925, 1598.088750, 545.362030, 90.044123, X, Y)
[Thu Dec  1 02:11:52 2011] Writing fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2.gif
[Thu Dec  1 02:16:27 2011] Mean detx,y = (-18.88, 62.04) 
[Thu Dec  1 02:16:30 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 02:20:16 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 02:20:16 2011] Setting source spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 02:20:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec  1 03:55:22 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:22 2011] Error reading totcts from fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 03:55:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:25 2011] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0603460101_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 03:55:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:25 2011] Updating source flux to 1e-12
[Thu Dec  1 03:59:12 2011] Flag c found in src. 2 procflags, skipping spectral fitting