[Mon Nov 28 11:10:37 2011] Detection parameters:
  Position = (307.5, 196.2) = 4 37 21.49 -47 21 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.0 +/- 20.5
  Background counts = 154.5
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 7.44'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 10.15"
[Mon Nov 28 11:18:08 2011] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.841
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 10.15"
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37.csv
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37.csv
[Wed Nov 30 17:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:41 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Nov 30 17:24:41 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Nov 30 17:24:41 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Nov 30 19:28:58 2011] Warning, spatial fit 37 centroid is now closest to src. 38
[Wed Nov 30 19:28:58 2011] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 18.668509 pixels away
[Wed Nov 30 19:28:58 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:28:58 2011] Assessing source extent using major
[Wed Nov 30 19:28:58 2011] Source does appear to be extended
[Wed Nov 30 19:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:30 2011] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:29:30 2011] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Nov 30 19:29:30 2011] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.841
[Wed Nov 30 19:29:30 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 10.15"
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src33.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src33 appears to have run properly
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Dec  1 00:43:56 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 13.348178 pixels away
[Thu Dec  1 00:43:56 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:43:56 2011] Assessing source extent using major
[Thu Dec  1 00:43:56 2011] Source does appear to be extended
[Thu Dec  1 00:43:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 00:44:23 2011] XMMSAS src. selection expression = ellipse(26702.582214, 17023.062256, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 00:44:23 2011] Writing source region out to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37_src.reg
[Thu Dec  1 00:44:23 2011] Extracting stamp from image fullrun_mos1_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (270, 159) - (345, 234)
[Thu Dec  1 00:44:23 2011] XMMSAS bgd. selection expression = annulus(26702.582214, 17023.062256, 1087.500000, 2175.000000, X, Y)
[Thu Dec  1 00:44:23 2011] Writing fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37.gif
[Thu Dec  1 01:07:00 2011] Mean detx,y = (-2882.89, 7447.34) 
[Thu Dec  1 01:07:02 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 01:07:25 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 01:07:25 2011] Setting source spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Dec  1 01:07:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Dec  1 02:11:39 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 02:11:39 2011] rmf not generated due to insufficient counts
[Thu Dec  1 03:55:20 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:20 2011] Error reading totcts from fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Dec  1 03:55:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:22 2011] Using photon index=1.80, rate=0.00148, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src37.arf
[Thu Dec  1 03:55:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:22 2011] Updating source flux to 1.8e-14
[Thu Dec  1 03:55:29 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting