[Mon Nov 28 11:10:36 2011] Detection parameters:
  Position = (421.2, 254.1) = 4 36 32.88 -47 17 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 20.5
  Background counts = 146.7
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 9.46'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 11.16"
[Mon Nov 28 11:18:08 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 11.16"
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28.csv
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28.csv
[Wed Nov 30 17:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Nov 30 17:24:40 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Nov 30 19:28:58 2011] Warning, spatial fit 28 centroid is now closest to src. 30
[Wed Nov 30 19:28:58 2011] Spatial fit model total counts = 696.270000, observed total counts = 696.000000
[Wed Nov 30 19:28:58 2011] Offset between fit and detection position for source 28 = 0.330959 pixels
[Wed Nov 30 19:28:58 2011] Warning, changing simple spatial fit ID from 28 to 30
[Wed Nov 30 19:28:58 2011] 701.511400 total counts/ 668.827000 bgd. counts: snr = 1.263815
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.330959 pixels
  Position = (420.9, 254.0) = 4 36 33.01 -47 17 45.6
  Extent = 2.9 (2.8-5.4)", rotation angle = 0
  Source counts = 32.7 +/- 26.5
  Background counts = 668.8
  Rate = 0.0003 +/- 0.0002
  Deleting source due to low Poisson probability