[Mon Nov 28 11:10:35 2011] Detection parameters:
  Position = (325.4, 318.5) = 4 37 13.84 -47 13 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.5 +/- 24.4
  Background counts = 172.6
  Rate = 0.002 +/- 0.0002

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 2.44'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Nov 28 11:18:08 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.226
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.65"
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20.csv
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20.csv
[Wed Nov 30 17:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Nov 30 17:24:40 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Nov 30 19:28:58 2011] Source 20 is offset by -6.591827 and -7.515411 pixels which is larger than
2 X fitted extent = 0.879136 x 0.879136, not incorporating fit results
[Wed Nov 30 19:28:58 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:28:58 2011] Assessing source extent using major
[Wed Nov 30 19:28:58 2011] Source does appear to be extended
[Wed Nov 30 19:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:30 2011] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:29:30 2011] Initial guess for spatial extent in simple fitting = 7.65"
[Wed Nov 30 19:29:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.226
[Wed Nov 30 19:29:30 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 7.65"
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19.csv
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19.csv
[Wed Nov 30 20:56:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Dec  1 00:43:56 2011] Spatial fit model total counts = 919.001000, observed total counts = 919.000000
[Thu Dec  1 00:43:56 2011] Offset between fit and detection position for source 20 = 0.248606 pixels
[Thu Dec  1 00:43:56 2011] 903.649200 total counts/ 806.641000 bgd. counts: snr = 3.415610
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.248606 pixels
  Position = (325.3, 318.7) = 4 37 13.91 -47 13 4.8
  Extent = 2.8 (2.2-3.5)", rotation angle = 0
  Source counts = 97.0 +/- 30.1
  Background counts = 806.6
  Rate = 0.0008 +/- 0.0003
[Thu Dec  1 00:43:56 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:43:56 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:43:56 2011] Source does appear to be extended
[Thu Dec  1 00:43:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 00:44:23 2011] XMMSAS src. selection expression = ellipse(28249.741600, 27677.976000, 170.800805, 170.800805, 0.000000, X, Y)
[Thu Dec  1 00:44:23 2011] Writing source region out to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20_src.reg
[Thu Dec  1 00:44:23 2011] Extracting stamp from image fullrun_mos1_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (315, 309) - (335, 329)
[Thu Dec  1 00:44:23 2011] XMMSAS bgd. selection expression = annulus(28249.741600, 27677.976000, 284.668008, 569.336016, X, Y)
[Thu Dec  1 00:44:23 2011] Writing fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20.gif
[Thu Dec  1 01:01:23 2011] Mean detx,y = (1290.71, -2495.48) 
[Thu Dec  1 01:01:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 01:01:35 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 01:01:35 2011] Setting source spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Dec  1 01:01:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Dec  1 01:42:12 2011] Not generating rmf since there are only 97 counts
[Thu Dec  1 01:42:12 2011] rmf not generated due to insufficient counts
[Thu Dec  1 03:55:20 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:20 2011] Error reading totcts from fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Dec  1 03:55:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:21 2011] Using photon index=1.80, rate=0.000813, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src20.arf
[Thu Dec  1 03:55:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:21 2011] Updating source flux to 1.4e-14
[Thu Dec  1 03:55:29 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Thu Dec  1 03:55:29 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting