[Mon Nov 28 11:10:35 2011] Detection parameters:
  Position = (272.2, 346.8) = 4 37 36.55 -47 11 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.9 +/- 24.9
  Background counts = 161.1
  Rate = 0.002 +/- 0.0003

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 3.99'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 8.42"
[Mon Nov 28 11:18:08 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.053
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 8.42"
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18.csv
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18.csv
[Wed Nov 30 17:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Nov 30 17:24:40 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Nov 30 19:28:58 2011] Spatial fit model total counts = 1385.860000, observed total counts = 1380.000000
[Wed Nov 30 19:28:58 2011] Offset between fit and detection position for source 18 = 5.063545 pixels
[Wed Nov 30 19:28:58 2011] 1365.684000 total counts/ 861.558000 bgd. counts: snr = 17.175004
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.063545 pixels
  Position = (277.3, 346.2) = 4 37 34.40 -47 11 5.1
  Extent = 16.8 (16.8-33.7)", rotation angle = 0
  Source counts = 504.1 +/- 37.0
  Background counts = 861.6
  Rate = 0.004 +/- 0.0003
[Wed Nov 30 19:28:58 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:28:58 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:28:58 2011] Source does appear to be extended
[Wed Nov 30 19:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:29:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 19:29:30 2011] Initial guess for spatial extent in simple fitting = 16.85"
[Wed Nov 30 19:29:30 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.059
[Wed Nov 30 19:29:30 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 16.85"
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17.csv
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17.csv
[Wed Nov 30 20:56:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Dec  1 00:43:56 2011] Warning, spatial fit 17 centroid is now closest to src. 8
[Thu Dec  1 00:43:56 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:43:56 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:43:56 2011] Source does appear to be extended
[Thu Dec  1 00:43:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 00:44:23 2011] XMMSAS src. selection expression = ellipse(24073.998000, 30073.265000, 1010.748029, 1010.748029, 0.000000, X, Y)
[Thu Dec  1 00:44:23 2011] Writing source region out to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18_src.reg
[Thu Dec  1 00:44:23 2011] Extracting stamp from image fullrun_mos1_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (219, 288) - (335, 404)
[Thu Dec  1 00:44:23 2011] XMMSAS bgd. selection expression = annulus(24073.998000, 30073.265000, 1684.580048, 3369.160097, X, Y) && !ellipse(25363.432540, 29528.029360, 1396.363240, 1396.363240, 0.000000, X, Y) && !ellipse(25403.062195, 28231.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.911880, 26518.519600, 408.444812, 408.444812, 0.000000, X, Y)
[Thu Dec  1 00:44:23 2011] Writing fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18.gif
[Thu Dec  1 01:00:01 2011] Mean detx,y = (-1822.59, -5504.39) 
[Thu Dec  1 01:00:03 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 01:00:41 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 01:00:41 2011] Setting source spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Dec  1 01:00:41 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Dec  1 03:55:20 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:20 2011] Error reading totcts from fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Dec  1 03:55:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:21 2011] Using photon index=1.80, rate=0.00423, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src18.arf
[Thu Dec  1 03:55:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:21 2011] Updating source flux to 4.9e-14