[Mon Nov 28 11:10:34 2011] Detection parameters:
  Position = (306.0, 398.2) = 4 37 22.15 -47 7 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557.7 +/- 32.8
  Background counts = 139.3
  Rate = 0.008 +/- 0.0005

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 7.26'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Nov 28 11:18:08 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.06"
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11.csv
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Nov 30 17:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11.csv
[Wed Nov 30 17:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Nov 30 17:24:40 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Nov 30 19:28:58 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.572355 pixels away
[Wed Nov 30 19:28:58 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:28:58 2011] Assessing source extent using major
[Wed Nov 30 19:28:58 2011] Source does appear to be extended
[Wed Nov 30 19:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:30 2011] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:29:30 2011] Initial guess for spatial extent in simple fitting = 10.06"
[Wed Nov 30 19:29:30 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Wed Nov 30 19:29:30 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 10.06"
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11.csv
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Nov 30 20:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11.csv
[Wed Nov 30 20:56:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Dec  1 00:43:56 2011] Spatial fit model total counts = 1040.000000, observed total counts = 1040.000000
[Thu Dec  1 00:43:56 2011] Offset between fit and detection position for source 11 = 0.225467 pixels
[Thu Dec  1 00:43:56 2011] 1036.960000 total counts/ 679.510000 bgd. counts: snr = 13.712523
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.225467 pixels
  Position = (305.8, 398.4) = 4 37 22.23 -47 7 18.2
  Extent = 5.9 (5.2-6.6)", rotation angle = 0
  Source counts = 357.4 +/- 32.2
  Background counts = 679.5
  Rate = 0.003 +/- 0.0003
[Thu Dec  1 00:43:56 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:43:56 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:43:56 2011] Source does appear to be extended
[Thu Dec  1 00:43:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 00:44:22 2011] XMMSAS src. selection expression = ellipse(26556.360560, 34611.210600, 352.897810, 352.897810, 0.000000, X, Y)
[Thu Dec  1 00:44:22 2011] Writing source region out to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11_src.reg
[Thu Dec  1 00:44:22 2011] Extracting stamp from image fullrun_mos1_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (286, 378) - (326, 419)
[Thu Dec  1 00:44:22 2011] XMMSAS bgd. selection expression = annulus(26556.360560, 34611.210600, 588.163017, 1176.326034, X, Y)
[Thu Dec  1 00:44:22 2011] Writing fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11.gif
[Thu Dec  1 00:57:52 2011] Mean detx,y = (1357.93, -9635.12) 
[Thu Dec  1 00:57:55 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 00:58:05 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 00:58:05 2011] Setting source spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec  1 00:58:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Dec  1 03:55:19 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:19 2011] Error reading totcts from fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec  1 03:55:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:21 2011] Using photon index=1.80, rate=0.003, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src11.arf
[Thu Dec  1 03:55:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:21 2011] Updating source flux to 5.5e-14