[Mon Nov 28 11:10:34 2011] Detection parameters:
  Position = (453.8, 299.8) = 4 36 19.02 -47 14 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3693.0 +/- 74.4
  Background counts = 133.4
  Rate = 0.03 +/- 0.0006

[Mon Nov 28 11:10:37 2011] Off-axis axis estimate = 11.26'
[Mon Nov 28 11:18:08 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:18:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 11:18:08 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Mon Nov 28 11:18:08 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981
[Mon Nov 28 11:18:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.06"
[Wed Nov 30 17:24:39 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 17:24:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:24:39 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 17:24:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:24:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 17:24:40 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:24:40 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 19:28:58 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.304528 pixels away
[Wed Nov 30 19:28:58 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:28:58 2011] Assessing source extent using major
[Wed Nov 30 19:28:58 2011] Source does appear to be extended
[Wed Nov 30 19:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:29:30 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:29:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 19:29:30 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Wed Nov 30 19:29:30 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981
[Wed Nov 30 19:29:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.06"
[Wed Nov 30 20:56:56 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 20:56:57 2011] fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 20:56:57 2011] Fit fullrun_mos1_xmm0603460101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 00:43:56 2011] Spatial fit model total counts = 4410.990000, observed total counts = 4411.000000
[Thu Dec  1 00:43:56 2011] Offset between fit and detection position for source 1 = 0.294591 pixels
[Thu Dec  1 00:43:56 2011] 4401.890000 total counts/ 1560.870000 bgd. counts: snr = 71.910271
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.294591 pixels
  Position = (453.6, 299.6) = 4 36 19.11 -47 14 26.8
  Extent = 8.6 (8.3-8.9)" x 5.3 (5.1-5.6)", rotation angle = 88 (85-91) degrees
  Source counts = 2841.0 +/- 66.3
  Background counts = 1560.9
  Rate = 0.02 +/- 0.0006
[Thu Dec  1 00:43:56 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 00:43:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 00:43:56 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 00:43:56 2011] Source does appear to be extended
[Thu Dec  1 00:43:56 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.48
[Thu Dec  1 00:44:22 2011] Counts = 2841.020000, rescaling region sizes by 2.000000
[Thu Dec  1 00:44:22 2011] XMMSAS src. selection expression = ellipse(39411.176600, 26015.019000, 1030.861230, 640.147218, 87.591491, X, Y)
[Thu Dec  1 00:44:22 2011] Writing source region out to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec  1 00:44:22 2011] Extracting stamp from image fullrun_mos1_xmm0603460101_pi300-10000_cl_sm2.00.img.gz, (394, 240) - (513, 359)
[Thu Dec  1 00:44:22 2011] XMMSAS bgd. selection expression = annulus(39411.176600, 26015.019000, 3436.204099, 6872.408198, X, Y) && !ellipse(37131.940857, 32759.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39836.531586, 21101.778000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35310.370392, 26709.211823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34211.955600, 23901.287600, 519.880015, 519.880015, 0.000000, X, Y) && !ellipse(37946.690740, 22183.442200, 564.654416, 564.654416, 0.000000, X, Y) && !ellipse(33113.243600, 21270.735000, 296.412809, 184.735205, 69.075116, X, Y) && !ellipse(37963.448242, 19961.794708, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 00:44:22 2011] Writing fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1.gif
[Thu Dec  1 00:44:35 2011] Mean detx,y = (11690.00, 1870.52) 
[Thu Dec  1 00:44:37 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 00:46:33 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 00:46:34 2011] Setting source spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 00:46:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec  1 03:55:18 2011] Updating aperture counts using extracted products
[Thu Dec  1 03:55:18 2011] Error reading totcts from fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 03:55:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:55:20 2011] Using photon index=1.80, rate=0.0238, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 03:55:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:55:20 2011] Updating source flux to 4e-13
[Thu Dec  1 03:59:12 2011] Reading fit data from xmm0603460101/analysis//spectral/fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec  1 03:59:12 2011] Spectral fit parameter nH value = 4.66415e+13
[Thu Dec  1 03:59:12 2011] Spectral fit parameter PhoIndex value = 3.15762
[Thu Dec  1 03:59:12 2011] Failed to get F(0.3-8.0) from xmm0603460101/analysis//spectral/fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec  1 03:59:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 03:59:12 2011] Using Nh = 4.7e+13, photon index=3.16, rate=0.0238, arf fullrun_mos1_xmm0603460101_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 03:59:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 03:59:12 2011] Updating source flux to 2.9e-13