[Mon May 27 11:25:00 2013] Detection parameters:
  Position = (481.5, 397.9) = 12 31 25.68 12 20 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.2 +/- 15.5
  Background counts = 42.5
  Rate = 0.005 +/- 0.0008

[Mon May 27 11:25:00 2013] Off-axis axis estimate = 15.10'
[Mon May 27 12:01:26 2013] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 12:01:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 12:01:26 2013] Initial guess for spatial extent in simple fitting = 13.98"
[Mon May 27 12:01:26 2013] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.924
[Mon May 27 12:01:26 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 13.98"
[Mon May 27 12:31:05 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 27 12:31:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8.csv
[Mon May 27 12:31:05 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 27 12:31:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8.csv
[Mon May 27 12:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 12:31:05 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 27 12:31:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 27 12:31:05 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 27 12:31:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 27 12:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 12:31:12 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.634991 pixels away
[Mon May 27 12:31:12 2013] Vigneting correction estimate = 1.000000
[Mon May 27 12:31:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 12:31:12 2013] Assessing source extent using major
[Mon May 27 12:31:12 2013] Source does appear to be extended
[Mon May 27 12:31:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 13:07:45 2013] Using EEF radius (= 13.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 13:07:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 13:07:45 2013] Initial guess for spatial extent in simple fitting = 13.98"
[Mon May 27 13:07:45 2013] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.924
[Mon May 27 13:07:45 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.98"
[Mon May 27 13:44:07 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 27 13:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8.csv
[Mon May 27 13:44:07 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 27 13:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8.csv
[Mon May 27 13:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 13:44:07 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 27 13:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 13:44:07 2013] fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 27 13:44:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 13:44:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 13:44:17 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.083668 pixels away
[Mon May 27 13:44:17 2013] Vigneting correction estimate = 1.000000
[Mon May 27 13:44:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 13:44:17 2013] Assessing source extent using major
[Mon May 27 13:44:17 2013] Source does appear to be extended
[Mon May 27 13:44:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 14:08:05 2013] XMMSAS src. selection expression = ellipse(41838.256409, 34573.058136, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 14:08:05 2013] Writing source region out to fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_src.reg
[Mon May 27 14:08:05 2013] Extracting stamp from image fullrun_mos2_xmm0603260601_pi300-10000_cl_sm2.00.img.gz, (444, 360) - (519, 435)
[Mon May 27 14:08:05 2013] XMMSAS bgd. selection expression = annulus(41838.256409, 34573.058136, 1087.500000, 2175.000000, X, Y)
[Mon May 27 14:08:05 2013] Writing fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3.gif
[Mon May 27 14:11:03 2013] Mean detx,y = (-16718.83, -406.65) 
[Mon May 27 14:11:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 14:11:31 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 14:11:31 2013] Setting source spectrum file to fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 27 14:11:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 27 14:22:20 2013] Not generating rmf since there are only 96 counts
[Mon May 27 14:22:20 2013] rmf not generated due to insufficient counts
[Mon May 27 14:23:49 2013] Updating aperture counts using extracted products
[Mon May 27 14:23:49 2013] Total counts from fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 372.00
[Mon May 27 14:23:49 2013] Total counts from fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1933.00
[Mon May 27 14:23:49 2013] Got source and background scale factors 896972.000000, 5366140.000000
[Mon May 27 14:23:50 2013] User source parameters:
  Position = (481.5, 397.9) = 12 31 25.68 12 20 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48.9 +/- 20.3
  Background aperture counts = 323.1
  Rate = 0.002 +/- 0.001

[Mon May 27 14:23:50 2013] Updating counts from extracted products
[Mon May 27 14:23:50 2013] Set source signif. to 48.89/17.98 = 2.72
[Mon May 27 14:23:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 14:23:51 2013] Using photon index=1.80, rate=0.00248, arf fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3.arf
[Mon May 27 14:23:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 14:23:51 2013] Updating source flux to 8.2e-14
[Mon May 27 14:23:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 14:23:57 2013] xmm0603260601/analysis//spectral/fullrun_mos2_xmm0603260601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete