[Mon Jun  4 10:18:54 2012] Detection parameters:
  Position = (420.5, 402.6) = 12 30 39.45 12 51 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 10.0
  Background counts = 12.1
  Rate = 0.004 +/- 0.0008

[Mon Jun  4 10:18:56 2012] Off-axis axis estimate = 11.63'
[Mon Jun  4 11:08:54 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:08:54 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Mon Jun  4 11:08:54 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.115
[Mon Jun  4 11:08:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.24"
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jun  4 14:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13.csv
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jun  4 14:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13.csv
[Mon Jun  4 14:20:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jun  4 14:20:29 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jun  4 14:20:45 2012] Spatial fit model total counts = 194.929000, observed total counts = 181.000000
[Mon Jun  4 14:20:45 2012] Offset between fit and detection position for source 8 = 0.276393 pixels
[Mon Jun  4 14:20:45 2012] 195.884300 total counts/ 165.051000 bgd. counts: snr = 2.399998
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.276393 pixels
  Position = (420.2, 402.6) = 12 30 39.53 12 51 53.4
  Extent = 3.7 (3.1-5.4)", rotation angle = 0
  Source counts = 30.8 +/- 14.0
  Background counts = 165.1
  Rate = 0.002 +/- 0.001
[Mon Jun  4 14:20:45 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 14:20:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 14:20:45 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 14:20:45 2012] Source does appear to be extended
[Mon Jun  4 14:20:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 15:22:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 15:22:36 2012] Initial guess for spatial extent in simple fitting = 3.73"
[Mon Jun  4 15:22:36 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.221
[Mon Jun  4 15:22:36 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 3.73"
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun  4 16:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11.csv
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun  4 16:50:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11.csv
[Mon Jun  4 16:50:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun  4 16:50:43 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jun  4 16:50:58 2012] Warning, spatial fit 11 centroid is now closest to src. 7
[Mon Jun  4 16:50:58 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 16:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 16:50:58 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 16:50:58 2012] Source does appear to be extended
[Mon Jun  4 16:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 17:15:58 2012] XMMSAS src. selection expression = ellipse(36511.932000, 34976.672200, 223.815606, 223.815606, 0.000000, X, Y)
[Mon Jun  4 17:15:58 2012] Writing source region out to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun  4 17:15:58 2012] Extracting stamp from image fullrun_mos2_xmm0603260501_pi300-10000_cl_sm2.00.img.gz, (407, 390) - (433, 415)
[Mon Jun  4 17:15:58 2012] XMMSAS bgd. selection expression = annulus(36511.932000, 34976.672200, 373.026011, 746.052021, X, Y)
[Mon Jun  4 17:15:58 2012] Writing fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8.gif
[Mon Jun  4 17:20:45 2012] Mean detx,y = (-12450.79, 1249.98) 
[Mon Jun  4 17:20:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 17:20:58 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 17:20:58 2012] Setting source spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun  4 17:20:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun  4 17:27:57 2012] Not generating rmf since there are only 30 counts
[Mon Jun  4 17:27:57 2012] rmf not generated due to insufficient counts
[Mon Jun  4 17:31:08 2012] Updating aperture counts using extracted products
[Mon Jun  4 17:31:08 2012] Error reading totcts from fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun  4 17:31:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 17:31:10 2012] Using photon index=1.80, rate=0.00244, arf fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8.arf
[Mon Jun  4 17:31:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 17:31:10 2012] Updating source flux to 7.2e-14
[Mon Jun  4 17:31:24 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  4 17:31:25 2012] xmm0603260501/analysis//spectral/fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete