[Mon Jun  4 10:18:54 2012] Detection parameters:
  Position = (225.3, 470.1) = 12 31 37.51 12 56 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.6 +/- 12.0
  Background counts = 7.1
  Rate = 0.007 +/- 0.0009

[Mon Jun  4 10:18:56 2012] Off-axis axis estimate = 13.53'
[Mon Jun  4 11:08:54 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:08:54 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Mon Jun  4 11:08:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.921
[Mon Jun  4 11:08:54 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.19"
[Mon Jun  4 14:20:28 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jun  4 14:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6.csv
[Mon Jun  4 14:20:28 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jun  4 14:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6.csv
[Mon Jun  4 14:20:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jun  4 14:20:29 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jun  4 14:20:45 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.813768 pixels away
[Mon Jun  4 14:20:45 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 14:20:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 14:20:45 2012] Assessing source extent using major
[Mon Jun  4 14:20:45 2012] Source does appear to be extended
[Mon Jun  4 14:20:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 15:22:36 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 15:22:36 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Mon Jun  4 15:22:36 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.921
[Mon Jun  4 15:22:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.19"
[Mon Jun  4 16:50:42 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun  4 16:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5.csv
[Mon Jun  4 16:50:42 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun  4 16:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5.csv
[Mon Jun  4 16:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun  4 16:50:43 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun  4 16:50:58 2012] Spatial fit model total counts = 168.246000, observed total counts = 163.000000
[Mon Jun  4 16:50:58 2012] Offset between fit and detection position for source 5 = 0.237401 pixels
[Mon Jun  4 16:50:58 2012] 168.418800 total counts/ 112.416000 bgd. counts: snr = 5.281967
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.237401 pixels
  Position = (225.6, 470.0) = 12 31 37.44 12 56 46.9
  Extent = 5.7 (4.4-7.0)", rotation angle = 0
  Source counts = 56.0 +/- 13.0
  Background counts = 112.4
  Rate = 0.004 +/- 0.001
[Mon Jun  4 16:50:58 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 16:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 16:50:58 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 16:50:58 2012] Source does appear to be extended
[Mon Jun  4 16:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 17:15:58 2012] XMMSAS src. selection expression = ellipse(19575.542000, 40845.503200, 341.568010, 341.568010, 0.000000, X, Y)
[Mon Jun  4 17:15:58 2012] Writing source region out to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun  4 17:15:58 2012] Extracting stamp from image fullrun_mos2_xmm0603260501_pi300-10000_cl_sm2.00.img.gz, (206, 450) - (245, 490)
[Mon Jun  4 17:15:58 2012] XMMSAS bgd. selection expression = annulus(19575.542000, 40845.503200, 569.280016, 1138.560033, X, Y)
[Mon Jun  4 17:15:58 2012] Writing fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5.gif
[Mon Jun  4 17:17:59 2012] Mean detx,y = (-403.46, 14514.41) 
[Mon Jun  4 17:18:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 17:18:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 17:18:22 2012] Setting source spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun  4 17:18:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun  4 17:26:42 2012] Not generating rmf since there are only 56 counts
[Mon Jun  4 17:26:42 2012] rmf not generated due to insufficient counts
[Mon Jun  4 17:31:08 2012] Updating aperture counts using extracted products
[Mon Jun  4 17:31:08 2012] Error reading totcts from fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun  4 17:31:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 17:31:09 2012] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5.arf
[Mon Jun  4 17:31:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 17:31:09 2012] Updating source flux to 1.6e-13
[Mon Jun  4 17:31:24 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  4 17:31:25 2012] xmm0603260501/analysis//spectral/fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete