[Mon Jun  4 10:18:55 2012] Detection parameters:
  Position = (294.7, 131.9) = 12 31 16.86 12 32 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.1 +/- 11.5
  Background counts = 19.4
  Rate = 0.004 +/- 0.0009

[Mon Jun  4 10:18:56 2012] Off-axis axis estimate = 12.08'
[Mon Jun  4 11:08:54 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:08:54 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Mon Jun  4 11:08:54 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927
[Mon Jun  4 11:08:54 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.47"
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun  4 14:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17.csv
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun  4 14:20:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17.csv
[Mon Jun  4 14:20:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun  4 14:20:29 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun  4 14:20:29 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jun  4 14:20:45 2012] Source 17 is offset by -3.657048 and -8.738642 pixels which is larger than
2 X fitted extent = 1.451559 x 1.451559, not incorporating fit results
[Mon Jun  4 14:20:45 2012] Warning, spatial fit 17 centroid is now closest to src. 15
[Mon Jun  4 14:20:45 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.864641 pixels away
[Mon Jun  4 14:20:45 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 14:20:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 14:20:45 2012] Assessing source extent using major
[Mon Jun  4 14:20:45 2012] Source does appear to be extended
[Mon Jun  4 14:20:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 14:20:45 2012] Source is confused with source 21
[Mon Jun  4 15:22:36 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 15:22:36 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Mon Jun  4 15:22:36 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927
[Mon Jun  4 15:22:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.47"
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jun  4 16:50:43 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_src15 appears to have run properly
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jun  4 16:50:43 2012] fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jun  4 16:50:43 2012] Fit fullrun_mos2_xmm0603260501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jun  4 16:50:58 2012] Warning, spatial fit 15 centroid is now closest to src. 15
[Mon Jun  4 16:50:58 2012] Spatial fit model total counts = 346.333000, observed total counts = 281.000000
[Mon Jun  4 16:50:58 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  4 16:50:58 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 16:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 16:50:58 2012] Assessing source extent using major
[Mon Jun  4 16:50:58 2012] Source does appear to be extended
[Mon Jun  4 16:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 17:15:58 2012] XMMSAS src. selection expression = ellipse(25593.050781, 11424.524109, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  4 17:15:58 2012] Writing source region out to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun  4 17:15:58 2012] Extracting stamp from image fullrun_mos2_xmm0603260501_pi300-10000_cl_sm2.00.img.gz, (257, 94) - (332, 169)
[Mon Jun  4 17:15:58 2012] XMMSAS bgd. selection expression = annulus(25593.050781, 11424.524109, 1087.500000, 2175.000000, X, Y) && !ellipse(26958.418182, 11072.112114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.963898, 11066.863121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.386902, 11695.147263, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  4 17:15:58 2012] Writing fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17.gif
[Mon Jun  4 17:22:35 2012] Mean detx,y = (8444.94, -14154.43) 
[Mon Jun  4 17:22:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 17:22:59 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 17:23:00 2012] Setting source spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun  4 17:23:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun  4 17:29:10 2012] Not generating rmf since there are only 50 counts
[Mon Jun  4 17:29:10 2012] rmf not generated due to insufficient counts
[Mon Jun  4 17:31:09 2012] Updating aperture counts using extracted products
[Mon Jun  4 17:31:09 2012] Error reading totcts from fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun  4 17:31:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 17:31:10 2012] Using photon index=1.80, rate=0.00397, arf fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17.arf
[Mon Jun  4 17:31:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 17:31:10 2012] Updating source flux to 1.1e-13
[Mon Jun  4 17:31:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  4 17:31:25 2012] xmm0603260501/analysis//spectral/fullrun_mos2_xmm0603260501_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete