[Sun Jun 16 00:56:13 2013] Detection parameters:
  Position = (226.4, 126.1) = 12 30 24.99 12 28 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 22.2
  Background counts = 72.6
  Rate = 0.02 +/- 0.002

[Sun Jun 16 00:56:15 2013] Off-axis axis estimate = 13.54'
[Sun Jun 16 00:56:45 2013] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:56:45 2013] Initial guess for spatial extent in simple fitting = 13.20"
[Sun Jun 16 00:56:45 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Sun Jun 16 00:56:45 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.20"
[Sun Jun 16 00:56:48 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 16 00:56:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 00:56:48 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 16 00:56:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 00:56:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:56:50 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 16 00:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 00:56:50 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 16 00:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 00:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:06 2013] Spatial fit model total counts = 1666.020000, observed total counts = 1467.000000
[Sun Jun 16 00:57:06 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 00:57:06 2013] Source 4 is offset by -2.809664 and 3.327600 pixels which is larger than
2 X fitted extent = 1.527807 x 1.527807, not incorporating fit results
[Sun Jun 16 00:57:06 2013] Spatial fit model total counts = 1838.660000, observed total counts = 1832.000000
[Sun Jun 16 00:57:06 2013] Offset between fit and detection position for source 4 = 3.006311 pixels
[Sun Jun 16 00:57:06 2013] Warning, changing simple spatial fit ID from 4 to 31
[Sun Jun 16 00:57:06 2013] 1769.204000 total counts/ 1646.570000 bgd. counts: snr = 3.022183
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.006311 pixels
  Position = (229.3, 125.3) = 12 30 24.13 12 28 54.5
  Extent = 13.2 (5.5-24.2)", rotation angle = 0
  Source counts = 122.6 +/- 42.1
  Background counts = 1646.6
  Rate = 0.01 +/- 0.004
[Sun Jun 16 00:57:06 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:06 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:57:06 2013] Source does appear to be extended
[Sun Jun 16 00:57:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:57:06 2013] Source is confused with source 32
[Sun Jun 16 00:57:06 2013] Source is confused with source 34
[Sun Jun 16 00:57:06 2013] Source is confused with source 35
[Sun Jun 16 00:57:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:57:22 2013] Initial guess for spatial extent in simple fitting = 13.19"
[Sun Jun 16 00:57:22 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.982
[Sun Jun 16 00:57:22 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 13.19"
[Sun Jun 16 00:57:23 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 16 00:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 00:57:23 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 16 00:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 00:57:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:24 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 16 00:57:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 00:57:24 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 16 00:57:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 00:57:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:40 2013] Warning, spatial fit 4 centroid is now closest to src. 26
[Sun Jun 16 00:57:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:40 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:57:40 2013] Source does appear to be extended
[Sun Jun 16 00:57:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:57:58 2013] XMMSAS src. selection expression = ellipse(19901.152000, 10851.686000, 791.484023, 791.484023, 0.000000, X, Y)
[Sun Jun 16 00:57:58 2013] Not overwriting source region fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 16 00:57:58 2013] Extracting stamp from image fullrun_pn_xmm0603260401_pi300-10000_cl_sm2.00.img.gz, (184, 80) - (275, 171)
[Sun Jun 16 00:57:58 2013] XMMSAS bgd. selection expression = annulus(19901.152000, 10851.686000, 1319.140038, 2638.280076, X, Y) && !ellipse(17358.284927, 12017.035049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17470.064316, 11381.174118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16911.527130, 12604.006271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.169800, 11961.048447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16742.330078, 11958.735916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20287.475204, 11685.121872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19506.981552, 11683.891266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18901.553894, 11692.339569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20634.832000, 12219.670000, 2048.760059, 2048.760059, 0.000000, X, Y) && !ellipse(18050.826752, 11442.234482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21644.801849, 11364.645233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22627.003387, 11252.822037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20563.113708, 11085.725777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18422.642365, 11103.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21214.664000, 10883.350000, 2079.648060, 2079.648060, 0.000000, X, Y) && !ellipse(20744.474000, 10654.052000, 2076.376060, 2076.376060, 0.000000, X, Y)
[Sun Jun 16 00:57:58 2013] Writing fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4.gif
[Sun Jun 16 00:58:00 2013] ../../xmm0603260401/products/events/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0603260401/products/events/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Jun 16 00:58:00 2013] Mean detx,y = (-11947.18, 13339.15) 
[Sun Jun 16 00:58:00 2013] ../../xmm0603260401/products/images/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0603260401/products/images/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Jun 16 00:58:00 2013] ../../xmm0603260401/products/spectra/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0603260401/products/spectra/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Jun 16 00:58:00 2013] Setting source spectrum file to fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 16 00:58:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 16 00:58:00 2013] ../../xmm0603260401/products/lightcurves/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0603260401/products/lightcurves/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Jun 16 00:58:14 2013] fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Sun Jun 16 00:58:14 2013] fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sun Jun 16 01:05:59 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:05:59 2013] Total counts from fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1243.00
[Sun Jun 16 01:05:59 2013] Total counts from fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 204.00
[Sun Jun 16 01:05:59 2013] Got source and background scale factors 1677905.000000, 0.000000
[Sun Jun 16 01:05:59 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 16 01:06:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:06:07 2013] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4.arf
[Sun Jun 16 01:06:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:06:07 2013] Updating source flux to 1e-13
[Sun Jun 16 01:06:18 2013] Flag b found in src. 4 procflags, skipping spectral fitting
[Sun Jun 16 01:06:18 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Sun Jun 16 01:06:18 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Sun Jun 16 01:06:26 2013] xmm0603260401/analysis//spectral/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete