[Sun Jun 16 00:56:14 2013] Detection parameters:
  Position = (269.1, 138.0) = 12 30 12.30 12 29 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.5 +/- 18.3
  Background counts = 73.4
  Rate = 0.009 +/- 0.002

[Sun Jun 16 00:56:15 2013] Off-axis axis estimate = 11.82'
[Sun Jun 16 00:56:45 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:56:45 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Sun Jun 16 00:56:45 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.808
[Sun Jun 16 00:56:45 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.34"
[Sun Jun 16 00:56:49 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun 16 00:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21.csv
[Sun Jun 16 00:56:49 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun 16 00:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21.csv
[Sun Jun 16 00:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:56:50 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun 16 00:56:50 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun 16 00:56:50 2013] Fit fullrun_pn_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Jun 16 00:57:06 2013] Warning, spatial fit 21 centroid is now closest to src. 30
[Sun Jun 16 00:57:06 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:06 2013] Assessing source extent using major
[Sun Jun 16 00:57:06 2013] Source does appear to be extended
[Sun Jun 16 00:57:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:57:22 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:57:22 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Sun Jun 16 00:57:22 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.808
[Sun Jun 16 00:57:22 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 12.34"
[Sun Jun 16 00:57:24 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun 16 00:57:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21.csv
[Sun Jun 16 00:57:24 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun 16 00:57:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21.csv
[Sun Jun 16 00:57:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:25 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun 16 00:57:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 16 00:57:25 2013] fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun 16 00:57:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 16 00:57:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:40 2013] Warning, spatial fit 21 centroid is now closest to src. 31
[Sun Jun 16 00:57:40 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.485263 pixels away
[Sun Jun 16 00:57:40 2013] Source 22 is offset by 8.614641 and -1.924891 pixels which is larger than
2 X fitted extent = 1.530529 x 1.530529, not incorporating fit results
[Sun Jun 16 00:57:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:40 2013] Assessing source extent using major
[Sun Jun 16 00:57:40 2013] Source does appear to be extended
[Sun Jun 16 00:57:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:57:59 2013] XMMSAS src. selection expression = ellipse(23367.169800, 11961.048447, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 00:57:59 2013] Not overwriting source region fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun 16 00:57:59 2013] Extracting stamp from image fullrun_pn_xmm0603260401_pi300-10000_cl_sm2.00.img.gz, (232, 101) - (307, 176)
[Sun Jun 16 00:57:59 2013] XMMSAS bgd. selection expression = annulus(23367.169800, 11961.048447, 1087.500000, 2175.000000, X, Y) && !ellipse(25459.834686, 12240.226105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20634.832000, 12219.670000, 2048.760059, 2048.760059, 0.000000, X, Y) && !ellipse(21644.801849, 11364.645233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22627.003387, 11252.822037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20563.113708, 11085.725777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21214.664000, 10883.350000, 2079.648060, 2079.648060, 0.000000, X, Y) && !ellipse(20744.474000, 10654.052000, 2076.376060, 2076.376060, 0.000000, X, Y)
[Sun Jun 16 00:57:59 2013] Writing fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22.gif
[Sun Jun 16 00:58:01 2013] ../../xmm0603260401/products/events/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0603260401/products/events/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sun Jun 16 00:58:01 2013] Mean detx,y = (-8369.41, 13634.47) 
[Sun Jun 16 00:58:01 2013] ../../xmm0603260401/products/images/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src.img and ../../xmm0603260401/products/images/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Sun Jun 16 00:58:01 2013] ../../xmm0603260401/products/spectra/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0603260401/products/spectra/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sun Jun 16 00:58:01 2013] Setting source spectrum file to fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 16 00:58:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun 16 00:58:01 2013] ../../xmm0603260401/products/lightcurves/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0603260401/products/lightcurves/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sun Jun 16 00:58:14 2013] Not generating rmf since there are only 97 counts
[Sun Jun 16 00:58:14 2013] rmf not generated due to insufficient counts
[Sun Jun 16 00:58:14 2013] fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Sun Jun 16 01:06:03 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:06:03 2013] Total counts from fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 806.00
[Sun Jun 16 01:06:03 2013] Total counts from fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1698.00
[Sun Jun 16 01:06:03 2013] Got source and background scale factors 1335480.000000, 1619395.000000
[Sun Jun 16 01:06:03 2013] User source parameters:
  Position = (269.1, 138.0) = 12 30 12.30 12 29 50.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -594.3 +/- 29.4
  Background aperture counts = 1400.3
  Rate = -0.05 +/- 0.003

[Sun Jun 16 01:06:03 2013] Updating counts from extracted products
[Sun Jun 16 01:06:03 2013] Set source signif. to -594.30/37.42 = -15.88
[Sun Jun 16 01:06:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:06:08 2013] Using photon index=1.80, rate=-0.0539, arf fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22.arf
[Sun Jun 16 01:06:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:06:08 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 01:06:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:06:26 2013] xmm0603260401/analysis//spectral/fullrun_pn_xmm0603260401_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete