[Sun Jun 16 00:56:16 2013] Detection parameters:
  Position = (428.0, 299.0) = 12 29 25.09 12 41 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 10.5
  Background counts = 15.5
  Rate = 0.008 +/- 0.001

[Sun Jun 16 00:56:17 2013] Off-axis axis estimate = 9.39'
[Sun Jun 16 00:56:52 2013] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:56:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 00:56:52 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Sun Jun 16 00:56:52 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Sun Jun 16 00:56:52 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.12"
[Sun Jun 16 00:56:53 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 16 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3.csv
[Sun Jun 16 00:56:53 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 16 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3.csv
[Sun Jun 16 00:56:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:56:53 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 16 00:56:53 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 16 00:56:53 2013] Fit fullrun_mos1_xmm0603260401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 16 00:57:09 2013] Spatial fit model total counts = 190.562000, observed total counts = 194.000000
[Sun Jun 16 00:57:09 2013] Offset between fit and detection position for source 4 = 0.169377 pixels
[Sun Jun 16 00:57:09 2013] 188.972900 total counts/ 146.027000 bgd. counts: snr = 3.553899
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.169377 pixels
  Position = (427.8, 299.0) = 12 29 25.14 12 41 30.0
  Extent = 5.5 (3.7-9.3)", rotation angle = 0
  Source counts = 42.9 +/- 13.7
  Background counts = 146.0
  Rate = 0.003 +/- 0.001
[Sun Jun 16 00:57:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:09 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:57:09 2013] Source does appear to be extended
[Sun Jun 16 00:57:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:57:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:57:25 2013] Initial guess for spatial extent in simple fitting = 5.46"
[Sun Jun 16 00:57:25 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.300
[Sun Jun 16 00:57:25 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.46"
[Sun Jun 16 00:57:26 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 16 00:57:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 00:57:26 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 16 00:57:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 00:57:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:57:27 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 16 00:57:27 2013] fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 16 00:57:27 2013] Fit fullrun_mos1_xmm0603260401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 16 00:57:43 2013] Spatial fit model total counts = 190.877000, observed total counts = 194.000000
[Sun Jun 16 00:57:43 2013] Offset between fit and detection position for source 4 = 0.028593 pixels
[Sun Jun 16 00:57:43 2013] 189.246200 total counts/ 148.228000 bgd. counts: snr = 3.369081
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.028593 pixels
  Position = (427.8, 299.0) = 12 29 25.14 12 41 29.9
  Extent = 5.1 (3.7-9.3)", rotation angle = 0
  Source counts = 41.0 +/- 13.8
  Background counts = 148.2
  Rate = 0.003 +/- 0.001
[Sun Jun 16 00:57:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:57:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:57:43 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:57:43 2013] Source does appear to be extended
[Sun Jun 16 00:57:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:58:14 2013] XMMSAS src. selection expression = ellipse(37172.992180, 25963.456400, 304.287609, 304.287609, 0.000000, X, Y)
[Sun Jun 16 00:58:14 2013] Not overwriting source region fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 16 00:58:14 2013] Extracting stamp from image fullrun_mos1_xmm0603260401_pi300-10000_cl_sm2.00.img.gz, (410, 282) - (445, 316)
[Sun Jun 16 00:58:14 2013] XMMSAS bgd. selection expression = annulus(37172.992180, 25963.456400, 507.146015, 1014.292029, X, Y)
[Sun Jun 16 00:58:14 2013] Writing fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4.gif
[Sun Jun 16 00:58:15 2013] ../../xmm0603260401/products/events/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0603260401/products/events/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Jun 16 00:58:15 2013] Mean detx,y = (-5295.32, 9196.40) 
[Sun Jun 16 00:58:15 2013] ../../xmm0603260401/products/images/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0603260401/products/images/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Jun 16 00:58:15 2013] ../../xmm0603260401/products/spectra/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0603260401/products/spectra/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Jun 16 00:58:15 2013] Setting source spectrum file to fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 16 00:58:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 16 00:58:15 2013] ../../xmm0603260401/products/lightcurves/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0603260401/products/lightcurves/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Jun 16 00:58:21 2013] Not generating rmf since there are only 41 counts
[Sun Jun 16 00:58:21 2013] rmf not generated due to insufficient counts
[Sun Jun 16 00:58:21 2013] fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sun Jun 16 01:06:09 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:06:09 2013] Total counts from fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 62.00
[Sun Jun 16 01:06:09 2013] Total counts from fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 186.00
[Sun Jun 16 01:06:09 2013] Got source and background scale factors 277984.000000, 2250016.000000
[Sun Jun 16 01:06:09 2013] User source parameters:
  Position = (427.8, 299.0) = 12 29 25.14 12 41 29.9
  Extent = 5.1 (3.7-9.3)", rotation angle = 0
  Source aperture counts = 39.0 +/- 8.9
  Background aperture counts = 23.0
  Rate = 0.003 +/- 0.0007

[Sun Jun 16 01:06:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:06:11 2013] Using photon index=1.80, rate=0.00325, arf fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4.arf
[Sun Jun 16 01:06:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:06:11 2013] Updating source flux to 6.8e-14
[Sun Jun 16 01:06:15 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:06:16 2013] xmm0603260401/analysis//spectral/fullrun_mos1_xmm0603260401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete