[Mon May 27 10:30:15 2013] Detection parameters:
  Position = (196.1, 478.7) = 12 30 24.08 12 18 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.4 +/- 19.2
  Background counts = 90.3
  Rate = 0.009 +/- 0.001

[Mon May 27 10:30:16 2013] Off-axis axis estimate = 15.03'
[Mon May 27 10:33:40 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 10:33:40 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Mon May 27 10:33:40 2013] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.965
[Mon May 27 10:33:40 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.94"
[Mon May 27 14:02:39 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 27 14:02:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4.csv
[Mon May 27 14:02:39 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 27 14:02:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4.csv
[Mon May 27 14:02:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 14:02:39 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 27 14:02:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 27 14:02:39 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 27 14:02:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 27 14:02:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 14:23:39 2013] Warning, spatial fit 4 centroid is now closest to src. 5
[Mon May 27 14:23:39 2013] Vigneting correction estimate = 1.000000
[Mon May 27 14:23:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 14:23:39 2013] Assessing source extent using major
[Mon May 27 14:23:39 2013] Source does appear to be extended
[Mon May 27 14:23:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 14:23:39 2013] Source is confused with source 5
[Mon May 27 14:23:51 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 14:23:51 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Mon May 27 14:23:51 2013] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.965
[Mon May 27 14:23:51 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 13.94"
[Mon May 27 16:47:30 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 27 16:47:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4.csv
[Mon May 27 16:47:30 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 27 16:47:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4.csv
[Mon May 27 16:47:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 16:47:31 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 27 16:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 27 16:47:31 2013] fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 27 16:47:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 27 16:47:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 17:03:22 2013] Spatial fit model total counts = 2611.040000, observed total counts = 1312.000000
[Mon May 27 17:03:22 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 17:03:22 2013] Spatial fit model total counts = 1956.170000, observed total counts = 1615.000000
[Mon May 27 17:03:22 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 17:03:22 2013] Source 4 is offset by -0.545765 and -5.182845 pixels which is larger than
2 X fitted extent = 1.569747 x 1.569747, not incorporating fit results
[Mon May 27 17:03:22 2013] Vigneting correction estimate = 1.000000
[Mon May 27 17:03:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 17:03:22 2013] Assessing source extent using major
[Mon May 27 17:03:22 2013] Source does appear to be extended
[Mon May 27 17:03:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 17:03:30 2013] XMMSAS src. selection expression = ellipse(17015.117081, 41599.898499, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 17:03:30 2013] Writing source region out to fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_src.reg
[Mon May 27 17:03:30 2013] Extracting stamp from image fullrun_pn_xmm0603260201_pi300-10000_cl_sm2.00.img.gz, (159, 441) - (234, 516)
[Mon May 27 17:03:30 2013] XMMSAS bgd. selection expression = annulus(17015.117081, 41599.898499, 1087.500000, 2175.000000, X, Y) && !ellipse(19656.362793, 42242.221771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17482.813766, 41286.307678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16190.880493, 41191.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15675.081314, 41088.691193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18792.327316, 42345.653748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17179.102310, 40902.852417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19626.436630, 42621.606873, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 17:03:30 2013] Writing fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4.gif
[Mon May 27 17:05:23 2013] Mean detx,y = (-3844.08, -16188.45) 
[Mon May 27 17:05:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 17:05:48 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 17:05:49 2013] Setting source spectrum file to fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 27 17:05:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 27 17:14:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 17:14:18 2013] rmf not generated due to insufficient counts
[Mon May 27 17:26:25 2013] Updating aperture counts using extracted products
[Mon May 27 17:26:25 2013] Total counts from fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 745.00
[Mon May 27 17:26:26 2013] Total counts from fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1622.00
[Mon May 27 17:26:26 2013] Got source and background scale factors 850404.000000, 880898.000000
[Mon May 27 17:26:26 2013] User source parameters:
  Position = (196.1, 478.7) = 12 30 24.08 12 18 38.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -820.9 +/- 28.3
  Background aperture counts = 1565.9
  Rate = -0.06 +/- 0.002

[Mon May 27 17:26:26 2013] Updating counts from extracted products
[Mon May 27 17:26:26 2013] Set source signif. to -820.85/39.57 = -20.74
[Mon May 27 17:26:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 17:26:31 2013] Using photon index=1.80, rate=-0.0608, arf fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4.arf
[Mon May 27 17:26:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 17:26:31 2013] Updated flux is not positive, keeping original flux
[Mon May 27 17:26:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 17:26:42 2013] xmm0603260201/analysis//spectral/fullrun_pn_xmm0603260201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete