[Mon May 27 10:31:01 2013] Detection parameters:
  Position = (261.3, 248.9) = 12 30 4.74 12 1 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.9 +/- 14.2
  Background counts = 30.1
  Rate = 0.008 +/- 0.001

[Mon May 27 10:31:01 2013] Off-axis axis estimate = 4.49'
[Mon May 27 14:11:19 2013] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Mon May 27 14:11:19 2013] Initial guess for spatial extent in simple fitting = 8.67"
[Mon May 27 14:11:19 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Mon May 27 14:11:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.67"
[Mon May 27 14:23:34 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 27 14:23:34 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 27 14:23:34 2013] Fit fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon May 27 14:23:34 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 27 14:23:34 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 27 14:23:34 2013] Fit fullrun_mos2_xmm0603260201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 27 14:23:42 2013] Spatial fit model total counts = 360.909000, observed total counts = 351.000000
[Mon May 27 14:23:42 2013] Offset between fit and detection position for source 4 = 0.101079 pixels
[Mon May 27 14:23:42 2013] 360.167000 total counts/ 304.427000 bgd. counts: snr = 3.194665
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.101079 pixels
  Position = (261.4, 248.8) = 12 30 4.71 12 1 53.7
  Extent = 3.1 (2.3-4.4)", rotation angle = 0
  Source counts = 55.7 +/- 19.0
  Background counts = 304.4
  Rate = 0.003 +/- 0.001
[Mon May 27 14:23:42 2013] Vigneting correction estimate = 1.000000
[Mon May 27 14:23:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 14:23:42 2013] Assessing source extent using major axis lower bound
[Mon May 27 14:23:42 2013] Source does appear to be extended
[Mon May 27 14:23:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 16:54:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 16:54:57 2013] Initial guess for spatial extent in simple fitting = 3.11"
[Mon May 27 16:54:57 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.015
[Mon May 27 16:54:57 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 3.11"
[Mon May 27 17:03:17 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 27 17:03:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1.csv
[Mon May 27 17:03:17 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 27 17:03:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1.csv
[Mon May 27 17:03:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 17:03:17 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 27 17:03:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 17:03:17 2013] fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 27 17:03:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 17:03:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603260201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 17:03:24 2013] Spatial fit model total counts = -15.959300, observed total counts = 351.000000
[Mon May 27 17:03:24 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 17:03:24 2013] Vigneting correction estimate = 1.000000
[Mon May 27 17:03:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 17:03:24 2013] Assessing source extent using major axis lower bound
[Mon May 27 17:03:24 2013] Source does appear to be extended
[Mon May 27 17:03:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 17:23:02 2013] XMMSAS src. selection expression = ellipse(22689.601000, 21597.850820, 186.809405, 186.809405, 0.000000, X, Y)
[Mon May 27 17:23:02 2013] Writing source region out to fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_src.reg
[Mon May 27 17:23:02 2013] Extracting stamp from image fullrun_mos2_xmm0603260201_pi300-10000_cl_sm2.00.img.gz, (251, 238) - (272, 260)
[Mon May 27 17:23:02 2013] XMMSAS bgd. selection expression = annulus(22689.601000, 21597.850820, 311.349009, 622.698018, X, Y)
[Mon May 27 17:23:02 2013] Writing fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4.gif
[Mon May 27 17:23:04 2013] Mean detx,y = (5713.72, -4556.27) 
[Mon May 27 17:23:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 17:23:12 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 17:23:12 2013] Setting source spectrum file to fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 27 17:23:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 27 17:25:21 2013] Not generating rmf since there are only 55 counts
[Mon May 27 17:25:21 2013] rmf not generated due to insufficient counts
[Mon May 27 17:26:34 2013] Updating aperture counts using extracted products
[Mon May 27 17:26:34 2013] Total counts from fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 75.00
[Mon May 27 17:26:34 2013] Total counts from fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 147.00
[Mon May 27 17:26:34 2013] Got source and background scale factors 112000.000000, 915200.000000
[Mon May 27 17:26:34 2013] User source parameters:
  Position = (261.4, 248.8) = 12 30 4.71 12 1 53.7
  Extent = 3.1 (2.3-4.4)", rotation angle = 0
  Source aperture counts = 57.0 +/- 9.7
  Background aperture counts = 18.0
  Rate = 0.003 +/- 0.0006

[Mon May 27 17:26:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 17:26:37 2013] Using photon index=1.80, rate=0.00321, arf fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4.arf
[Mon May 27 17:26:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 17:26:37 2013] Updating source flux to 8e-14
[Mon May 27 17:26:39 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Mon May 27 17:26:39 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 17:26:40 2013] xmm0603260201/analysis//spectral/fullrun_mos2_xmm0603260201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete