[Sun Mar 18 17:16:34 2012] Detection parameters:
  Position = (303.5, 201.3) = 10 27 31.08 53 32 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.4 +/- 27.5
  Background counts = 44.3
  Rate = 0.04 +/- 0.002

[Sun Mar 18 17:16:35 2012] Off-axis axis estimate = 7.05'
[Sun Mar 18 17:20:29 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 17:20:29 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Sun Mar 18 17:20:29 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.804
[Sun Mar 18 17:20:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.95"
[Sun Mar 18 17:53:22 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 17:53:22 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 17:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 17:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 17:53:22 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 17:53:22 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 17:53:22 2012] Fit fullrun_pn_xmm0603250101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 18:18:44 2012] Spatial fit model total counts = 521.752000, observed total counts = 495.000000
[Sun Mar 18 18:18:44 2012] Offset between fit and detection position for source 1 = 0.128052 pixels
[Sun Mar 18 18:18:44 2012] 527.326000 total counts/ 284.380000 bgd. counts: snr = 14.406558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.128052 pixels
  Position = (303.5, 201.4) = 10 27 31.09 53 32 3.5
  Extent = 5.1 (4.4-5.7)", rotation angle = 0
  Source counts = 242.9 +/- 23.0
  Background counts = 284.4
  Rate = 0.02 +/- 0.002
[Sun Mar 18 18:18:44 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 18:18:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 18:18:44 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 18:18:44 2012] Source does appear to be extended
[Sun Mar 18 18:18:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 18:18:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 18:18:57 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Sun Mar 18 18:18:57 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.811
[Sun Mar 18 18:18:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.07"
[Sun Mar 18 18:51:46 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 18:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 18:51:46 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 18:51:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 18:51:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 18:51:46 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 18:51:46 2012] fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 18:51:46 2012] Fit fullrun_pn_xmm0603250101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 19:14:16 2012] Spatial fit model total counts = 464.268000, observed total counts = 441.000000
[Sun Mar 18 19:14:16 2012] Offset between fit and detection position for source 1 = 0.036389 pixels
[Sun Mar 18 19:14:16 2012] 475.306000 total counts/ 235.886000 bgd. counts: snr = 15.588680
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036389 pixels
  Position = (303.5, 201.4) = 10 27 31.10 53 32 3.4
  Extent = 5.0 (4.3-5.6)", rotation angle = 0
  Source counts = 239.4 +/- 21.8
  Background counts = 235.9
  Rate = 0.02 +/- 0.002
[Sun Mar 18 19:14:16 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 19:14:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 19:14:16 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 19:14:16 2012] Source does appear to be extended
[Sun Mar 18 19:14:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 19:14:31 2012] XMMSAS src. selection expression = ellipse(26351.906800, 17474.280800, 298.276209, 298.276209, 0.000000, X, Y)
[Sun Mar 18 19:14:31 2012] Writing source region out to fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 19:14:31 2012] Extracting stamp from image fullrun_pn_xmm0603250101_pi300-10000_cl_sm2.00.img.gz, (286, 184) - (321, 219)
[Sun Mar 18 19:14:31 2012] XMMSAS bgd. selection expression = annulus(26351.906800, 17474.280800, 497.127014, 994.254029, X, Y)
[Sun Mar 18 19:14:31 2012] Writing fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 19:14:45 2012] Mean detx,y = (1313.11, -6635.28) 
[Sun Mar 18 19:14:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 19:15:15 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 19:15:15 2012] Setting source spectrum file to fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 19:15:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 19:50:59 2012] Updating aperture counts using extracted products
[Sun Mar 18 19:51:00 2012] Error reading totcts from fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 19:51:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 19:51:02 2012] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 19:51:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 19:51:02 2012] Updating source flux to 7.8e-14
[Sun Mar 18 19:51:31 2012] Reading fit data from xmm0603250101/analysis//spectral/fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 19:51:31 2012] Spectral fit parameter nH value = 3.06892e+20
[Sun Mar 18 19:51:31 2012] Spectral fit parameter PhoIndex value = 1.64742
[Sun Mar 18 19:51:31 2012] Failed to get F(0.3-8.0) from xmm0603250101/analysis//spectral/fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 19:51:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 19:51:31 2012] Using Nh = 3.1e+20, photon index=1.65, rate=0.0186, arf fullrun_pn_xmm0603250101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 19:51:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 19:51:31 2012] Updating source flux to 9.5e-14