[Mon Apr 30 21:32:21 2012] Detection parameters: Position = (479.1, 354.8) = 16 41 18.65 -54 25 23.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 153.3 +/- 23.1 Background counts = 122.2 Rate = 0.004 +/- 0.0006 [Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 13.72' [Mon Apr 30 21:38:49 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting [Mon Apr 30 21:38:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 13.29" [Mon Apr 30 21:38:49 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969 [Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.29" [Tue May 1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9.ximg exists [Tue May 1 03:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9.csv [Tue May 1 03:48:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9_1.ximg exists [Tue May 1 03:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9.csv [Tue May 1 03:48:13 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Tue May 1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Tue May 1 03:48:15 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Tue May 1 12:21:36 2012] Warning, spatial fit 9 centroid is now closest to src. 43 [Tue May 1 12:21:36 2012] Source 9 is offset by -1.122782 and 3.602433 pixels which is larger than 2 X fitted extent = 1.595131 x 1.595131, not incorporating fit results [Tue May 1 12:21:37 2012] Vigneting correction estimate = 1.000000 [Tue May 1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 1 12:21:37 2012] Assessing source extent using major [Tue May 1 12:21:37 2012] Source does appear to be extended [Tue May 1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 1 12:21:37 2012] Source is confused with source 12 [Tue May 1 12:23:13 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting [Tue May 1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 13.29" [Tue May 1 12:23:13 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969 [Tue May 1 12:23:13 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.29" [Tue May 1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9.ximg exists [Tue May 1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9.csv [Tue May 1 21:49:10 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9_1.ximg exists [Tue May 1 21:49:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9.csv [Tue May 1 21:49:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Tue May 1 21:49:13 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Tue May 1 21:49:13 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Wed May 2 07:09:58 2012] Warning, spatial fit 9 centroid is now closest to src. 106 [Wed May 2 07:09:58 2012] Source 9 is offset by -1.194920 and 3.602456 pixels which is larger than 2 X fitted extent = 1.595099 x 1.595099, not incorporating fit results [Wed May 2 07:09:59 2012] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 24.668232 pixels away [Wed May 2 07:09:59 2012] Vigneting correction estimate = 1.000000 [Wed May 2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 2 07:09:59 2012] Assessing source extent using major [Wed May 2 07:09:59 2012] Source does appear to be extended [Wed May 2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 2 07:11:29 2012] XMMSAS src. selection expression = ellipse(41634.697968, 30822.725708, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 2 07:11:29 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9_src.reg [Wed May 2 07:11:29 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (442, 317) - (517, 392) [Wed May 2 07:11:29 2012] XMMSAS bgd. selection expression = annulus(41634.697968, 30822.725708, 1087.500000, 2175.000000, X, Y) && !ellipse(42507.175110, 30563.979828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40846.946000, 30672.006000, 2042.768059, 2042.768059, 0.000000, X, Y) && !ellipse(39163.672821, 28577.763031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42698.667200, 27067.076000, 1773.776051, 1773.776051, 0.000000, X, Y) && !ellipse(42848.186000, 27210.444000, 2125.320061, 2125.320061, 0.000000, X, Y) && !ellipse(42453.394000, 26605.132000, 3992.368115, 3992.368115, 0.000000, X, Y) && !ellipse(42889.547119, 31525.511963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39234.801000, 30222.495200, 1976.064057, 247.007207, 335.454800, X, Y) && !ellipse(39857.771820, 30475.535492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39397.262000, 29848.614400, 2007.760058, 2007.760058, 0.000000, X, Y) && !ellipse(41675.057068, 29962.753754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40549.651215, 30072.037415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40048.657806, 29913.864044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39879.033295, 28907.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38642.652527, 28262.053497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40229.613983, 28197.496460, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 2 07:11:29 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9.gif [Wed May 2 07:30:42 2012] Mean detx,y = (-16814.83, 6171.93) [Wed May 2 07:30:48 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 2 07:31:14 2012] Binned source spectrum to 10 counts/bin [Wed May 2 07:31:14 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Wed May 2 07:31:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9_bgd.pi.gz [Wed May 2 13:00:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 2 13:00:12 2012] rmf not generated due to insufficient counts [Wed May 2 23:18:09 2012] Updating aperture counts using extracted products [Wed May 2 23:18:09 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Wed May 2 23:18:20 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 2 23:18:20 2012] Using photon index=1.80, rate=0.004, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src9.arf [Wed May 2 23:18:20 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 2 23:18:20 2012] Updating source flux to 3.7e-14 [Wed May 2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting