[Mon Apr 30 21:32:29 2012] Detection parameters:
  Position = (423.6, 362.2) = 16 41 46.32 -54 24 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.4 +/- 20.3
  Background counts = 135.3
  Rate = 0.002 +/- 0.0005

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 10.18'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Mon Apr 30 21:38:49 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 11.52"
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85.csv
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85_1.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85.csv
[Tue May  1 03:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Tue May  1 03:48:18 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Tue May  1 12:21:37 2012] Warning, spatial fit 85 centroid is now closest to src. 91
[Tue May  1 12:21:37 2012] Source 87 is offset by -3.599422 and -0.405847 pixels which is larger than
2 X fitted extent = 1.303177 x 1.303177, not incorporating fit results
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 91
[Tue May  1 12:23:13 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Tue May  1 12:23:13 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 11.52"
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83.csv
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83.csv
[Tue May  1 21:49:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue May  1 21:49:14 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Wed May  2 07:09:59 2012] Source 87 is offset by -4.298985 and -0.656417 pixels which is larger than
2 X fitted extent = 2.361122 x 2.361122, not incorporating fit results
[Wed May  2 07:09:59 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 10.232981 pixels away
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:38 2012] XMMSAS src. selection expression = ellipse(36806.118317, 31461.061127, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  2 07:11:38 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87_src.reg
[Wed May  2 07:11:38 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (386, 325) - (461, 400)
[Wed May  2 07:11:38 2012] XMMSAS bgd. selection expression = annulus(36806.118317, 31461.061127, 1087.500000, 2175.000000, X, Y) && !ellipse(40846.946000, 30672.006000, 2042.768059, 2042.768059, 0.000000, X, Y) && !ellipse(39163.672821, 28577.763031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42453.394000, 26605.132000, 3992.368115, 3992.368115, 0.000000, X, Y) && !ellipse(39234.801000, 30222.495200, 1976.064057, 247.007207, 335.454800, X, Y) && !ellipse(38362.748718, 31771.041107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.464000, 31356.368400, 569.011216, 569.011216, 0.000000, X, Y) && !ellipse(39397.262000, 29848.614400, 2007.760058, 2007.760058, 0.000000, X, Y) && !ellipse(38447.579559, 29873.603180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37149.891510, 29385.138855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35954.395538, 28978.348541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35109.387329, 28753.884399, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:38 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87.gif
[Wed May  2 10:42:27 2012] Mean detx,y = (-11995.96, 6864.93) 
[Wed May  2 10:42:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 10:43:10 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 10:43:11 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed May  2 10:43:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Wed May  2 16:27:15 2012] Not generating rmf since there are only 91 counts
[Wed May  2 16:27:15 2012] rmf not generated due to insufficient counts
[Wed May  2 23:18:14 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:14 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed May  2 23:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:23 2012] Using photon index=1.80, rate=0.00239, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src87.arf
[Wed May  2 23:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:24 2012] Updating source flux to 1.6e-14
[Wed May  2 23:36:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting