[Mon Apr 30 21:32:29 2012] Detection parameters:
  Position = (362.2, 365.3) = 16 42 16.93 -54 24 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.5 +/- 22.6
  Background counts = 160.7
  Rate = 0.004 +/- 0.0006

[Mon Apr 30 21:32:37 2012] Off-axis axis estimate = 6.70'
[Mon Apr 30 21:38:49 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:38:49 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Mon Apr 30 21:38:49 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.993
[Mon Apr 30 21:38:49 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 9.78"
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84.csv
[Tue May  1 03:48:15 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84_1.ximg exists
[Tue May  1 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84.csv
[Tue May  1 03:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Tue May  1 03:48:18 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Tue May  1 03:48:18 2012] Fit fullrun_pn_xmm0603220201_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Tue May  1 12:21:37 2012] Spatial fit model total counts = 1546.220000, observed total counts = 1546.000000
[Tue May  1 12:21:37 2012] Offset between fit and detection position for source 85 = 1.323447 pixels
[Tue May  1 12:21:37 2012] Warning, changing simple spatial fit ID from 84 to 81
[Tue May  1 12:21:37 2012] 1519.333000 total counts/ 1083.470000 bgd. counts: snr = 13.241633
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 1.323447 pixels
  Position = (360.9, 365.2) = 16 42 17.59 -54 24 40.8
  Extent = 19.3 (19.2-38.5)", rotation angle = 0
  Source counts = 435.9 +/- 39.0
  Background counts = 1083.5
  Rate = 0.01 +/- 0.001
[Tue May  1 12:21:37 2012] Vigneting correction estimate = 1.000000
[Tue May  1 12:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  1 12:21:37 2012] Assessing source extent using major axis lower bound
[Tue May  1 12:21:37 2012] Source does appear to be extended
[Tue May  1 12:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  1 12:21:37 2012] Source is confused with source 82
[Tue May  1 12:23:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  1 12:23:13 2012] Initial guess for spatial extent in simple fitting = 19.26"
[Tue May  1 12:23:13 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.029
[Tue May  1 12:23:13 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 19.26"
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81.csv
[Tue May  1 21:49:12 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81_1.ximg exists
[Tue May  1 21:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81.csv
[Tue May  1 21:49:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Tue May  1 21:49:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81.csv
[Tue May  1 21:49:14 2012] fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Tue May  1 21:49:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81.csv
[Tue May  1 21:49:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603220201_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 07:09:59 2012] Warning, spatial fit 81 centroid is now closest to src. 72
[Wed May  2 07:09:59 2012] Vigneting correction estimate = 1.000000
[Wed May  2 07:09:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 07:09:59 2012] Assessing source extent using major axis lower bound
[Wed May  2 07:09:59 2012] Source does appear to be extended
[Wed May  2 07:09:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 07:11:37 2012] XMMSAS src. selection expression = ellipse(31349.432000, 31721.587400, 1155.672033, 1155.672033, 0.000000, X, Y)
[Wed May  2 07:11:37 2012] Writing source region out to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85_src.reg
[Wed May  2 07:11:37 2012] Extracting stamp from image fullrun_pn_xmm0603220201_pi300-10000_cl_sm2.00.img.gz, (294, 299) - (427, 432)
[Wed May  2 07:11:37 2012] XMMSAS bgd. selection expression = annulus(31349.432000, 31721.587400, 1926.120055, 3852.240111, X, Y) && !ellipse(31549.013200, 28167.085200, 1443.704042, 621.618418, -0.000000, X, Y) && !ellipse(29027.944489, 28294.853729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.122650, 28418.721466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.708800, 28200.122400, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(30335.882400, 28183.741630, 782.668023, 782.668023, 0.000000, X, Y) && !ellipse(29663.145200, 28223.650000, 1318.328038, 591.476017, 3.640440, X, Y) && !ellipse(32641.415466, 29626.595184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.985687, 29334.544617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.715240, 27692.990448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.298000, 36730.034000, 2003.888058, 2003.888058, 0.000000, X, Y) && !ellipse(25196.248000, 34257.600000, 3231.712093, 3231.712093, 0.000000, X, Y) && !ellipse(30536.013000, 34359.921200, 370.916011, 370.916011, 0.000000, X, Y) && !ellipse(30143.651520, 34033.309265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.074000, 32461.454800, 1514.712044, 1514.712044, 0.000000, X, Y) && !ellipse(30284.778000, 32046.356200, 1540.896044, 1540.896044, 0.000000, X, Y) && !ellipse(30826.835693, 31826.127655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31833.384000, 31683.972200, 1564.312045, 1564.312045, 0.000000, X, Y) && !ellipse(32724.841797, 31559.775116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.314240, 30950.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35954.395538, 28978.348541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35109.387329, 28753.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32124.515778, 28728.632416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27586.651215, 28584.915680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33234.190582, 28383.189209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.842407, 27459.477966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.543274, 27623.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.307678, 27355.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35119.325104, 27081.709778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.399872, 27032.047455, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  2 07:11:37 2012] Writing fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85.gif
[Wed May  2 10:38:34 2012] Mean detx,y = (-6514.24, 7146.33) 
[Wed May  2 10:38:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 10:39:39 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 10:39:40 2012] Setting source spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed May  2 10:39:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Wed May  2 23:18:14 2012] Updating aperture counts using extracted products
[Wed May  2 23:18:14 2012] Error reading totcts from fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed May  2 23:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 23:18:23 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0603220201_pi300-10000_pass1_cl_src85.arf
[Wed May  2 23:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 23:18:23 2012] Updating source flux to 5.5e-14
[Wed May  2 23:36:14 2012] Flag c found in src. 85 procflags, skipping spectral fitting